| Subject | Text |
| Replace as many electrolytics as you can around the chips, especially the ones near big resistors or |
| more info on replacing the parts directly | I have some help to give if you have the exact same problem.
When you power up the screen, brief |
|
|
| First, what is a LOPT? ” Totally dead with just the high pitched noise.” Horizontal out put transist |
| DVD Recorder and TV Guide | I recently purchased a SONY DVD Recorder & Hard Disk Drive (HDD) Combo (RDR-HX715/KIT). I have |
| CODE OF GEARS (XEROX DOCUCOLOR 5750) | I NEED CODE OF THE KIT OF GEARS OF FIXING UNIT DOCUCOLOR 5750 OR THE CODE OF THE GEAR OF THE FIXING |
| Service manual for HK AVR65 | Please help me get Harman Kardon AVR65 service manual AVR45 could be replaceable too.
ykohavix@beze |
| i don't found general electric service maunal mod: 13gp240 | I would like to know if the service manual existing on the net.
If you can help me, please reques |
| NEED OF LABLES AND COLOUR CODES | [quote:1c55de7d09="Justmanuals"][quote:1c55de7d09="sflsan"]First off, how am I going to die?
And |
| Hi,
The DC offset is a marginal voltage at the ouput of an electronic stage. In theory, there sho |
| Hitachi 50SBX No Power and causes light to go out | I have a 50SBX that stop'd working the other day and Daddy is not happy. I was told by my kids that |
| unscrewing PCB off the case makes gnd float (floats anyway when you plug it in the 2 pin wall socket |
| Sony KP41S4U projection TV problem | I'm trying to fix a Sony KP41S4U projection TV.
Initially completely dead. Found that the 3.15 a |
| http://www.mcmelectronics.com/search.aspx?C=&K=tact%20switches&T=
Digi-key would be anoth |
| you dont need a manual to cure this fault just replace ic7064 on the small signal panel with updated |
| Replace your convergence ic's, check the resistors around them like Cory said, and check for open pi |
| Philips 27PT6441/37 won't turn on | Thank you for replying. I will get that repair kit and try that. Thanks so much for your help. |
| MS50 schematics | I have like for pages of the schematics, but not all, email me if u want them, plus if u could helpm |
|
|
| We have the same problem that you are describing here for our TV. We sent for a kit that contained |
| Plasma Fault Guidance, a little different! | Hi All,
New to the forum in view of my plight with my Plasma.
Long story cut short, 15 month old |
| 50H72 | Join the club. My 50H72 is also 2-1/2 years old, and twice it has blown its deflector board. Symptom |
| The best quality from China | :D
Professional Toner Cartridge Chips Manufacturer.
Our processing craftwork, product performan |
| Re: pin amp not working | [quote:c8eb6da2f4="SHELDONS TV"]:D [b:c8eb6da2f4][i:c8eb6da2f4]If you email the schematics to my add |
| The tech didn't really told me where was the location of the horizontal... I call them up and they t |
| American electronics in Germany | Hello,
I'm an American who has just moved to Germany. I've got a bunch of American electronic eq |
| SCR in 4-pi | FS0401BD 200 V, surface mount SCR in 4-pin DPAK package. Operational temperature range from -40° |
| There is no problem using radial mount. As far as the short legs, you need to have a small tip sold |
| probable cause is ic7064 on the small signal pcb, it is a 100pin surface mount device, make sure you |
| Mitsu 35" | We also have raining blue streaks with sound OK on our 35"... 12 years old. Found this on another s |
| Thomson 28VK24U (ICC17 chassis) LOPT Questions | The Thomson part for the LOPT is 15314460.
Replacement LOPTs are available, as are LOPTs with mod |
| It depends if you want to learn for fun or profit.
I wouldn't recommend television servicing as a c |