| Subject | Text |
| 5.5 The Blinking LED Procedure
5.5.1 Introduction
The software is capable of identifying different |
| there are different types of skipping. does it stay in one place and stutter, does it jump back, or |
|
|
| There are many adjustments for tracking. Really the only way is to calibrate them to factory specifi |
| Home Cinema Jvc TH-A30R DVD NO READ DISC AND NO EJECT | I have a dvd jvc th-a30r and dont open the door, i put one disc manually into the cd case and the mo |
| Re: Philips chassis EM2E , dont' start only stand by flashes | [quote:ed1122eb47="ciavatta"]Hi guy , have problem with this TV , when press main switch , the red l |
| Not familiar with the model in question, but I can tell you from experience dealing with other brand |
| Re: shorted resistor | [quote:2f2a89877c="ohms"]ah,so thats why it read 0ohms.anyways the problem is that the remote won't |
| SHARP Model CD-C5H | Please upload the service manual of SHARP model CD-C5H . I need only the part of manual of mechani |
| Panasonic CN-DV200 | Hi, i have problems with my GPS lens.
I need to buy a new laser lens for my panasonic CN-DV2000.
|
| Hi Mariuss
Interesting that the zener protecting the battery status signal was the one that died. |
| Re: SONY KV29FX20E. LED BLINKING TWICE | [quote="taban"]hello can you help me with this fail? thanks.
i think that its the fe1a |
| I was hoping it was worth a shot. I once saw an electronic shop that upgrades Pioneer laser disc pla |
| PANASONIC SA-PM10 | Hello, anyone know what pick-up laser unit is mountend in this Hi-Fi....?
Thanks in advance.
N |
| It's no garranty, but probably the only thing you can do is clean the laser unit with a cue-tip, dip |
| Self tuning guitar | Hi,
This may be a little obscure, but For a college project I am designing a self tuning guitar |
| Problems with LG plasma tv PDP42V5 using DGK-420W ( DGK420W revA) power supply pcb.
This PSU is al |
| Why isn't marriage considered legalized prostitution?. Menards sells peanuts because they can... Y s |
|
|
| Hi all, vtech,
Good news. The saga has ended!
Today I assembled my new CDM12.1 laser module. |
| if it is not recognising dvds but cds are fine it is going to be the laser assembly. if you want the |
| 1st item) Because you don't seem to have any high voltage, I'll would start by checking the HOT (lar |
| [quote:bb3c151812="minnie"]The color wheel has to spin before the dmd sends out the lamp enable puls |
| Problems with 11AK19P E-W control | Hi there!
Yet another topic about E-W control on a 11AK19P chassis. Unfortunately the other topi |
| help need | EXTREMELY URGENT HELP!!!NEED TO FIND SERVICE/REPAIR MANUAL FOR LASER MFP SAMSUNG SCX4016!!! :( |
| Before proceeding with replacing the chip, make sure that the fault is there and not elsewhere in th |
| i have the same TV and same 1+4 pulse LED fault problem, and still looking for solution. Do you kno |
| No Datasheet found but did find....
BA6891 Features:
The BA6891 is a 64M-bit, 3.0 V-only Flash |
| Thanks for the input, I was able to get the laser focus to work, and then it crapped out on the sled |
| :roll: dvd player has 2 gain control / separate trimmer for VCD and DVD .,remove disk , close the tr |
| datasheet | 8) heya fellow robots and robot-ess, can anyone help me please, I am looking for sansui rz-3060AVD d |
| samsung mm-c330 micro hifi | I have a mini hifi system samsung mm-dg25 mm.c330 frame will not turn over power to a pulse but will |