| Subject | Text |
| Jvc Tv,AV-14FMG3B is not having picture & sound, power i | It is unlikely to be the timer causing any problems but the timer can be reset simply by swithing "o |
| "Reverse protection diode?"
Just measure positive to ground. If zero see if unit has an |
|
|
| Projection TV Repairs | Dear Mr. Prabadisa,
Hello there !
You have invested money in a highly advanced electronic pc |
| D911 is [b:d797a3bb8e]RJ43[/b:d797a3bb8e] schottky diode and 905,907 are [b:d797a3bb8e]AG01[/b:d797a |
| New model chips | :)
Chips item codes of new products this period:
Lexmark X203/204, Xerox 6280, Dell 3130, Au |
| [quote:8046c12511="Anonymous"]Have you checked the horizontal output transistor for shorts?[/quote:8 |
| Beko 22.1 | I have a beko 22.1 chassis where 12V source (LD1086V) is running very hot. LD1086V is turning hot ve |
| Channel out on old Technics | This old Technics (Panasonic SA-5170) has been running forever. Yesterday it lost power. It was the |
| Philips 32PW6006/01 line stage shuts down after few seconds | Hi everyone,
I've got a sod of a TV set here which is puzzling me and I hoped that someone here |
| JVC KV-V10E | My VCR behaves bizzary. I think it broke up by getting wrong polarity. Anyway all fuses and transist |
| ....Typical problem with finding info on cheap chinese made products nowadays :x
Centrex is a ch |
| KV35v36 tv | Dont buy sony products......its the most bullshit systems,,,, and is very hard to repair.
indian t |
| good idea to try seperately , i'll need a load on the secondary ,, would a resister with high amp ra |
| panasonic with px1 chasis | can u help me with my board with B+ 41V and on and off relay
no oscillation on HV? |
| AVR7000 HK surround problems | Hello all,
I am loate to bring back a zombie thread, but well my amp turned into a zombie so I figu |
| speakers high definition tv start to click | Hello,
It could very well be that the clicking comes from spikes which appear on your mains suppl |
| Tektronix TDS3032 Goes Faulty! | My Tektronix 3032 DSO has developed a rather annoying fault. Channel 2 works fine and shows no fault |
|
|
| Sylvania 6313CD TV/VCR Combo Need Schematic and service manu | Hi i bought a Sylvania 6313CD TV/VCR Combo for my son a couple months ago from a pawn shop and would |
| PX-42XM1G | Hello,
I have experience on these products what is the problem ??
Mike. |
| New On-Line shop for electronic kits and more! | Hi to all!
I'v find this shop very interesting and whith quality products. [url]www.e-electronica |
| I have had good luck with a range of them. Imation, Maxell, Verbatim etc.
Due to variations in man |
| Hi Jouni that's great. And I've already found the procedure now. It is the same method that you de |
| Philips PTV915 Model 50P8341 | This unit powers up and then immediately starts switching what appears to be the source input every |
| Buttons not working | As per the first guy my 600CD has the same problem. On-Off and volume are all that works....nothing |
| How is the set stuck in standby? Are there any sounds coming from the back of the TV when you switch |
| Hi, if you are indeed right then i think you will find a lot more damage to your equipment than a bl |
| Alpine is the only company that will not allow the authorized repair centers to sell us parts or ser |
| LA6508 etc Posted information which may help, sorry no data | Out of this world games and accessories
Basket Checkout Account
Home Contact Help |
| Re: Notebooks. How to replace part. Teardown guides with pic | [quote:892730c2f4="Anonymous"][quote:892730c2f4="Anonymous"]hi sir before i want say sorry to you, |
| Sony ZS-S2ip boombox no sound | Hello
I have a sony zs-s2ip boombox that has no sound output at all. I tried all the functions ip |