| Subject | Text |
| Here's how I got Phillips' attention | Hi all,
Sorry to write again, but I've got a very useful update... My 27PT6441/37 had the same p |
| Not sure if I followed your connection, but as a general rule of thumb, every time the DVD video is |
|
|
| bad news, i have had this a couple of times and the cure was to replace the lcd panel, there are a c |
| Pioneer VSx-5900S | I do not get anything on FM or AM but the Vu meter shows a received signal as they fluxuate on left |
| [quote:b54fb7477b="vtech"]Not familiar with the specific unit, some mechanism loop basics to check |
| Wanted - Sony UP-D8800 service manual (and or help) | Hello All,
I am desperately looking for service information and especially a service manual for a |
| DTK CDD1401 and Markvision VC4968NI Monitors | I need service manuals or schematic diagrams for two old monitors I am trying to repair. They are a |
| What about units that wont power on? I assume from the previous post that the main cost in a flat pa |
| Sony KV-35V45, Bad CRT. Looking for short... | Hi. I tought i would start a new topic, since i've focused my problem and my questions are different |
| NEC PX-42VP1G or 42PD1 or 42PD2 | hello. I have a problem with Power Board - not work at all. I changed the main Mofset and and check |
| Majority of the codes have no real meaning on philips units. Basically it is some sort of communicat |
| What you are describing is identical to the issue which only affected the DVD operation cycle but I |
| SUBJECT: DIGITAL CONVERGENCE ADJUSTMENT MODE ACCESS
Details:
In the past, when the technician need |
| [quote:8046c12511="Anonymous"]Have you checked the horizontal output transistor for shorts?[/quote:8 |
| Beko 22.1 | I have a beko 22.1 chassis where 12V source (LD1086V) is running very hot. LD1086V is turning hot ve |
| Re: AVC | [quote:23d123f2da="jts1957"]What is AVC?
I'm presuming power strip or surge protection?[/quote:23d1 |
| Denon DN-2600F Cable Pinout | I need to make a replacement interconnect cable that goes between the two units. Could you pleas oh |
|
|
| On closer look, obviously the spindle is of a different type that I originally thought. (Hall effect |
| Service manual for marantz pm710 | Marantz PM 710 dc, I need schematic diagram or service manual. Tank! |
| panasonic with px1 chasis | can u help me with my board with B+ 41V and on and off relay
no oscillation on HV? |
| AVR7000 HK surround problems | Hello all,
I am loate to bring back a zombie thread, but well my amp turned into a zombie so I figu |
| [quote:3c401903bc="minnie"]By the end of the year vcr’s will be extinct. DVD burners have come down |
| [quote:52c49ffcc4="Kossta"]Excuse me. I also need code for VDO CRD 500
GM050011217145.
Thank you |
| Re; Checking "lenses" | I presume you mean the Laser.
All CD / DVD units have one (sometimes two) laser assembly. Generally |
| Hi Jouni that's great. And I've already found the procedure now. It is the same method that you de |
| Philips PTV915 Model 50P8341 | This unit powers up and then immediately starts switching what appears to be the source input every |
| Buttons not working | As per the first guy my 600CD has the same problem. On-Off and volume are all that works....nothing |
| JVC XV-THA30 DVD Surround Receiver Problem | I remember when these first came on the market and we had several faulty units that were sold to cus |
| Philips 26" LCD TV Model # 26FW5220/37 | I have a few units of the LCD TVs i would like to know what do i need to do to make it work in HDMI |
| Re: let's start over | Did the two units ever work well together, or this is the first time you've tryed to connect this TV |