| Subject | Text |
| DC Motor C4557-60003 from HP deskjet printer | I tested this motor,
it starts turning at 1V, very slowly. I was quite surprised by this.
At 6V it |
| MAX485E, MAX487E General Description | The MAX481E, MAX483E, MAX485E, MAX487E–
MAX491E, and MAX1487E are low-power transceivers for
RS-48 |
|
|
| MAG321D | Its not the inverters or you wouldnt get a picture at any time.Its not the main board cause that one |
| Digital main or logic board. |
| Actually have not been able to get to the switch - yet.
It is BURIED inside and inbetween about a t |
| :idea: Aaaahhhhhaaaaaaaaaaaa! I see now how the spindle motor could be the cause for the whole mess |
| Hello, will somebody help me fix a Sony TC-250A Reel deck?! | Hello world, I am an amateur DIY-er, and I am trying to fix a Sony TC-250A Reel-to-Reel deck! (A poo |
| Panasonic VCR Message F04 | Hi!
The link is below.
//www.eserviceinfo.com/downloadsm/9064/Panasonic_K-Mech.html
I checke |
| [quote:f9a1a39005="Anonymous"]Hi JD406
It sounds a good idea to use a bridge circuit with ssr. My |
| Note that this is a standard 4000-series CMOS logic ic. The prefix "HEF" is used by Philip |
| It's both horizontal and vertical suspect logic or digital main board. It could also be the Y sustai |
| Do the 5 and 12 volts go up if power supply/inverter board is unplugged from logic/main? |