Subject | Text |
| Hi,
I've checked the printboard (unfortunatly I don't have the schematics) and I've found the wor |
VS-4542 | I don't have any voltages except for the green power on light. I see a "blip" on the scope for the H |
|
when can't the unleaded soldering of Sn- Zn be used? | "The developing item about the sealing and packing technique by unleaded soldering at low tempe |
| first check dry solder on r\g\b drivers board that mounted on the crt neck. seconde you can measure |
| [b:66b2232330]Careful... you might put someone's eye out.[/b:66b2232330] Rider: Scopeless sniper wit |
Rca 46 inch.... | I have a 46 inch rca model #p46151wk that i bought roughly a year ago...Picture was fine when I boug |
Re: Sony TV KV 32TS46 | [quote:e5a9c0f057="Ray"]Sony KV-32TS46 TV , Q601 , Q602 (2SC4834) replaced, Q591 (2SC4927) HOT repla |
Please Help Harmon Kardon surround amp power problem | Hi
Please help i have a harmon kardon AVR630 surround amp. Ive had the unit for about 12 months a |
Sony HMD-A220 monitor no power | Hi,
the monitor doesn't turn on. The power led is off and AC fuse is ok.
I found HOT shorted and |
Circuit board Contamination-sugar water (limon-aid) | A Vintage Marants receiver (mdl. 4270) was subjected to internal contamination by one badely placed |
| It could many things causing your drive not to read a CD.
1. dust inside the drive on the laser l |
| Yes, you can gain access to the 64 point convergance menu...but if you have an error, I assume no re |
| I have not.
I picked up today what is my best guess of what the original resistors were (630 ohm) |
Re: Sony audio system DHC-MDX10 no sound | i have the same son of a gun problem please help |