| Subject | Text |
| Re: prolink 1 | [quote:4dd14e02bd="morf"]Please , help me! I need software for Prolink-1 . I need FAQ of upload! :( |
| IN THE UK THAT PART IS £135+VAT TRADE FROM PHILIPS DIRECT. A NEW RECORDER IS LESS THAN THAT RET |
|
|
| Joining up manual files | OK, I've now discovered WinRAR, downloadable from http://www.rarlab.com/download.htm
However, [co |
| hp 5943 problem with ink cartridges | hi guys !
i have met astrange problem.
i have an hp printer model deskjet 5943 which i bought |
| [Monitor] Proview Electronics 770M help with repair. | I've founded that monitor some days ago..
I've plugged to alimentation (220V 50Hz) and to computer |
| Philips 14gx1810\85R no start | I need your help with this tv set that does not start, when it is turned on all what I see is the re |
| prolink 1 | Please , help me! I need software for Prolink-1 . I need FAQ of upload! :( |
| KV-27HFR | AFTER AN ELECTRICAL STORM MY SONY KV-27HFR DIED. I GET 64 VOLT INSTEAD OF 135 VOLTS FROM THE POWER |
| RCA CTC197AH | Hi Guys,.Me again,This set had good pic after i did some convergence adjustements,but now the set ru |
| Thanks for the help!
The set deguases when switched on but doesn't make any tweeting noises. The |
| Voltage in hot line is 135 V. And bulb burn. So power supply is OK.
So there have to be shorted in |
| I had read the FAQ and it at least infers that if logged in, you should be able to edit your own pos |
| Samsung TXR2765 shuts down ~7 sec after turn on | Secondary supplies look OK (according to PCB silk-screen; no schem):
+135, +15, +12, +7; then downs |
| [quote:e484770b4b="bonespur"]1.
Yes, as I wrote, I do already know that I can do what you say in or |
| Source | I'm not showing a listing anywhere on a [ -135 ]; are you absolutely sure
its not a [ -130 ] you ar |