| Subject | Text |
| Problems with turn signal lights on side view mirrors | I recently purchased after market chevron turn signal lights that go on my existing side view mirror |
| Pioneer Projection monitor SD-P4571 Unfoucs image Right side | I have a Pioneer Projection monitor SD-P4571 that have problems in the right side of the screen. Ima |
|
|
| Looking for schematic for RCA DRC8335 VCR/DVD-R Combo. | Hi, the unit is RCA branded model DRC 8335B. The board that has the problem is actually the transpor |
| I need help with Mitsubishi Diamond Pro 900u, model NFJ9905 | Does anyone know a repair tip for a Mitsubishi Diamond Pro 900u, model NFJ9905 - Side pincushion has |
| I think I have identified the problem. its either bad soldering or a faulty component. When using a |
| Call for t-shoot oppinion and where to find BA6996FP | Hi guys!
Well, it looks like my first t-shoot conclusion, about what was wrong with my Eclipse, w |
| Hi, mbelec, | Hi, mbelec,
thanks for your reply...
Where would I see this error code ?
On the PC screen I ass |
| Thanks for your help!..
Well I never knew paint could get conductive with age!..
Thought ther |
| Oh..... yeah the problem... right.. lol
The screeching sound may or may not be related to the no |
| factory settings | How do you put the Sanyo CE27LD3 - B back to the factory settings?
I have just bought this set and |
| OK, fitted a new LOPT and arrrrrrrggh same problem. Lol well at least I've got a spare bush LOPT now |
| JVC MX-J76 volume problem | Hi guys! I have a JVC MX-J76 mini sound system here (3 cd changer, d-tape, pro-logic) and no matter |
| The 3 tries to come on is a protect device. Chances are there is something shorted on the horizontal |
| Could you check if there is any voltage e.g. on the collector of the high voltage transistor?
A b |
| Need help with replacing a board in a lg plasma | Hey guys
I just joined up here. I was given a LG plasma t.v (42PC3D) because the screen stopped |
| have you checked the hot transistor.i should also check diodes etc on secondary side of chopper tran |
| enclosed pictures | The 1st time the replacement transistor was fitted the insulating washer must not of been fitted cor |
|
|
| leoptics 15c (Picture sides bent inwards ) | Picture sides bent inwards
asking for,
brand=computer monitor- leoptics
model= 15c
problem= dea |
| Service manual for Onkyo PCS-207 stereo system. | Hello,
I am trying to find information about power transformer used in PCS-207 personal stereo syst |
| that little pin has a flathead, right? It actually drop right into the optical block assy. on the fr |
| Move to the quiet side of town |
| Thanks madmatt2024 :idea:
I think you've given good suggestions & precautions, that's very |
| Hmm...I've measured resistance for both the signal wire and ground wire all the way from the stylus |
| Service Manual for PC monitor Fujitsu FPC-CRTAAD | Hello to everybody out here in this forum,
l would like to seek help with the above.
l have thi |
| L7031LD Likom Monitor Help | I have a Monitor marked L7031LD Likom, with a R781 complete burnt up, and i need help with R781 valu |
| 5V to 3.3V micropower voltage regulator | hello,
For a microcontroller programmer using USB port ineeded to convert 5v to 3.3V,initially one |
| re; width problem | Dietrich, this ones a little harder, check solder connections in and around the horizontal output tr |
| Channel out on old Technics | Thanks RiffMaster, you were right! It's been quite awhile since I tried to trace circuits and then i |
| Toshiba TP50H50 | BTW, I chose to cut away a 2" section of the plastic support tray once I had the electronics tr |
| The main reason in gluing the bigger caps is to prevent movement while the PC board travels through |