| Subject | Text |
| vintage Telefunken 884V radio, circa 1952 | I have a Telefunken Model "884V / UKV Concertino-Sekretar" as shown here:
http://carlot |
| [quote:e125957d64="jts1957"]Have you tryed unplugging units from powerr outlet for "1 to 2 minu |
|
|
| What regulator? Does this not sound like a convergence board problem? The TV would blink at its fina |
| nothing is for free - but what happened to honesty? | Actually, the $80 was not justified -- not for 5 minutes, and turning my tv on -- and reiterating wh |
| Toshiba 32AFX61 Shuts of suddenly, red light blinks | My 5-year old Toshiba 32AFX61 has had a couple of problems which may or may not be related. For som |
| Zenith sm3247mk8 Will not turn on. | Set has no click, no activity when turn-on attempted. Intermittent shut down one week prior to no tu |
| MODEL?????? CHECK FOR DRY JOINTS, ARE CRT HEATERS LIT, DOES PICTURE FADE OUT OR SWITCH OFF, ANY SYMP |
| mitsubishi-vs-45609 | I will have to put the boards back in the set and check it again
but im almost positive the light w |
| Re: capacitor is the problem! | [quote:601560212e="luvtv"]Yes, it is the 3300uf @ 100volts cap.
I had the exact problems and sure e |
| Re: Repair tip for Viewsonic N3250W or N3235W power supply | Sounds like I keep having to repeat myself ...
[quote:d5074c6e4a="jts1957"]:evil: PEOPLE [n3250] |
| [quote:74617efcab="Anonymous"]I ordered the parts from Ness. The next day went to take a look at the |
| The e-bay listing had expired nearly two weeks prior to your reply. Thanks, though. I appreciate it |
| Help it's gone bang | Or more presicley click.
I have a PD4200 Marantz plasma , which has started switching itself off |
| Re: Similiar problem | [quote:732940a099="SParker"]My 60" Hitachi model 60SX10B has no picture or sound. My wife said |
| assignment | Prior to Commenting, I wanna state thank you for giving this incredible data. I feel too great to ev |
| Troubleshoot Shorted CRT Neckboard, now darker picture. | Hi!
This is a rather long post, but I'm simply trying to give as much information as possible to |
| Xerox 5028 | The auto document feeder is not working. I tried to shift the whole feeder slightly by loosening th |
|
|
| measure dc voltage at bad chan. output with no load. if over 0.1vdc then driver amp (circuit prior t |
| Re: same thing | [quote:25d9a1fee0="Mel"]After 4 years, my 57h82 has the same problem. Picture died away but there i |
| [quote:b0be7751b6="minnie"]Try unplugging it and see what happens when you plug it back in? Or hit t |
| hope not | 4 years still young for a tv, i can still get parts for a 10 year old tv. do you have schema for you |
| Service Labor
During a period of one (1) year from the effective warranty date, VIZIO will provide, |
| Re: Repair tip for Viewsonic N3250W or N3235W power supply | [quote:c87114d766="jts1957"]:evil: PEOPLE [SZASZ] JUST CAN'T BE BOTHERED TO READ PRIOR POSTS (or jus |
| Sony KV-X2982U | Similar problems to another post on this site.
When switched on, standby light comes on and stays |
| New bigger rooftop antenna? | Was the picture EVER acceptable? On each and every "local" channel or are only the lower n |
| I ordered the parts from Ness. The next day went to take a look at the set and to prepare for surger |
| more on laser replacement | Thanks for the suggestions--
So I removed the new laser and inspected it closely. During my curs |
| Have schematics + waveforms, please help find the dead part! | Okay, I really really need help here! I've disappointed my roommates long enough with this broken TV |