| Subject | Text |
| Chriscento | IDE means Integrated Drive Electronics. IDE was created as a way to standardize the use of hard driv |
| Thanks for the reply gary. That's what I thought and it sucks :( I had another screen that is the sa |
|
|
| A vertical line is the bottom buffer board. The tech will probably disconnect the ribbon cable and c |
| [quote:dc3e5a31c0="vtech"]I am not familiar with the specific set and without some sort of a diagram |
| I am not familiar with the specific set and without some sort of a diagram, won't to be easy to find |
| RCA TC Chasis CTC169AS2( 31" TV) | Hi fellows . Thanks you very much fo rall your guidance and i have been able to fix the TV. The Culp |
| Can you post a pic? Vertical line would be a buffer/address board fault. |
| So I finally got this plasma fixed. With the help of the power supply force on guide and the DW1 tro |
| hi minnie i went into service menu table ( service ) it had inch option which i changed to 50" |
| hi minnie i have made a video to show you fault better
[url]http://www.youtube.com/watch?v=AKus6 |
| Re: power problems on a sony kp-41ds1u | [quote:6df13950be="kash_2005"]hi there
i have a sony rear projection tv kp-41ds1u with a power fa |
| Have you disconnected the Y and X and no change? Have you disconnected the bottom buffer boards or t |
| anyone experiences with samsung plasma tvs ( picture fault ) | hi guys been working on 3 ps50c97hd samsung tvs.
all tvs had no picture due to blown top buffer a |
| Re: Audio problem with RCA TV | [quote:b1e59e1e9e="tmahdavi"]Hi,
I have a 32" RCA TV which recently started having audio pro |
| You'll need to create your own places to divide the circuit. Today's surface mount parts and double- |
| Samsung Plasma - no picture. Mod: PS50Q97HDX PDP: S50HW-YB02 | Hello.
I have a Samsung PS50Q97HD 50 inch plasma TV that keeps blowing new boards and I don't know |
| Up and down would suggest the bottom buffer board. |
|
|
| Dear
Audio source is an iPhone and the load is a 50W car speaker is not clear. Because to drive |
| Hi.
Assuming you have checked and re-soldered or changed SMD ferrites between DC input Jack and o |
| errors | Oh, forgot to mention that in the service menu it stated i had 4 errors
30, 12, 21, 72
i clear |
| toshiba 42hp66 bad y-sus board | I have a toshiba 42hp66. The y-sus board (6871qyh053b) failed and has been replace. On power up th |
| Hey guys, recently I repaired a Hitachi 55HDX99 Plasma TV with help from you guys on this thread.
|
| hi minnie
on further investigation i have just noticed theres 470 surface mount resistors on the |
| I'm assuming HAS picture.
from SAMS #2639-2: AUDIO: Inject an audio signal at pin 12 of IF/Sound/Sy |
| You need to replace the bottom buffer board. |
| forgive me if im wrong but would the digital mainboard cause the lower buffer cof resistors to burn |
| all connections appear to be wound. I unplugged each buffer board one at a time and no change. The l |
| Sounds like a bad Y sustain lower buffer board. |
| PS-50Q96HD samsung picture fault ( picture attached ) | i got a PS-50Q96HD samsung set suffers from a green / yellow / red dotted picture ?
orignal fault |
| Looks like a bad buffer board to me! Could be the panel also but worth a sot! C1 C2 are usualy the d |