| Subject | Text |
| aiwa mx-d8e ic 760 | i, i have a problem on an audio amplifier it´s a aiwa mx-d8e and i dont know the reference of |
| Need Service info for Samsung HCP-4752 | Dear Person:...I just finished replaceing 2 bad convergence IC's in a Samsung HCP-4752... On was act |
|
|
| Re: bad voltage | If the standby source can be isolated from the rest of the set, this will let you know if the " |
| Need help with a Philips 32PW840612R that won't start | When I turn it on the standby led is blinking and nothing happens. When I turn it of and on and trye |
| Ilo PDP4210EA1 42" Plasma Black screen s-video to comp | Nice forum and after reading several post I'm getting closer but totally new at Plasma TV repair, so |
| 19" Curtis Mathis TV has a black screen on the bottom 1 | When the TV has been on a while, a black box (screen) appears at the bottom 1/2 of the screen with t |
| Re: Service Manuals | [color=red:756723afa0]Schematics[/color:756723afa0] for these are as follows:
- NAKAMICHIA PA-7 A |
| Mag Innovision 800V 19" CRT monitor | I have been attempting to get my monitor repaired and I just got around to getting the board out as |
| minnie,
I found another fuse blown. Thought I had check everything. I waited to reply until I got n |
| Re: Sony ccd-trv43 camcorder no record picture | [quote:693d2c1452="wealthwise"]This just started today, I turn on the camcorder to record and and I |
| MAG monitor & DJV files | Greetings all,
I would like to say how useful this site is. I have tried to use |
| How about testing everything after the Scaler board, what kind of output does the scaler board have. |
| The other red wires go to a block. You swapped CRT boards now you need to swap the rest. |
| Thinkpad T23 Power | Yes this would definately be a cap problem. they are faulty not alowing to discharge. Try unplugging |
| service manual | Hello!
i search the service manual - electronic. My Unit is Siemens NCDC 2015. I want to install an |
| Re: tv | [quote="spikes5390"][quote:9846e8096f="drum"]sorry for the lack of info its a Sony TV is ther any wa |
| Hitachi TV turns on 2sec with a strange noise than shutsdown | Hi, I have a Hitachi television that stopped working:
Here is the problem: I plug it, power on: H |
|
|
| Can you solder? I wouldn´t try to adjust the trimmer first, but add another 4,43 Mhz quartz par |
| Toshiba TV 14R21 (PWB-1386 Board) keeps power on and off | [quote:b8bfe93703="minnie"]Chech r216 10k ohm to see if it's burnt. If so you need to replace the re |
| Bush tv (11ak45b5) Picture collaspe | Hi
I have been given a bush tv to have a look and and see if I can repair it. I am after so help |
| Help me use a zener diode | I am attempting to understand how a zener diode would work in the following application:
This is |
| Sony CCD-V30E Camcorder - Service Manual | I need the service manual for this old Sony Handycam and the funny thing is eserviceinfo actually ha |
| need help with my (new to me T.V.) | my mitsubishi big screen model # vs-7083 has a small problem with a fine blue line in the picture an |
| Pioneer VSx-5900S | I do not get anything on FM or AM but the Vu meter shows a received signal as they fluxuate on left |
| [quote:b54fb7477b="vtech"]Not familiar with the specific unit, some mechanism loop basics to check |
| Program Verify Mode
Verification should be performed on the programmed
bits to determine whether t |
| Samsung TI14C5 chassis C15A - Pal I to Pal BG | Hi,
I have this set in to change the system from Pal I to Pal BG, basically just changing the set |
| Yes, the "left click" button is seperate from the rest of the keyboard...I guess I am word |
| Sony KV-35V45, Bad CRT. Looking for short... | Hi. I tought i would start a new topic, since i've focused my problem and my questions are different |
| NEC PX-42VP1G or 42PD1 or 42PD2 | hello. I have a problem with Power Board - not work at all. I changed the main Mofset and and check |