| Subject | Text |
| Need resistor value for SHARP TV Model 21A2-S | HI DUDE..
Please help me,i need value resistor location R509 (near vertical ic=burn)
for SHARP TV |
| Re: resistor | [quote:08044d4b4b="dmattingly1"]I need to know what resistor to use to replace a .6 -.7vlt. surface |
|
|
| GE 19' Model # 19TVR60. Burned out resistor, Part# RL06 | GE 19' Model # 19TVR60. Burned out resistor, Part# RL06 (near the flyback). Part is unidentifiable. |
| resistor | I need to know what resistor to use to replace a .6 -.7vlt. surface mount fuse,I need to replace it |
| Metal Film Resistor | Could it be possible that 15 Ohms Metal Film Resistor will be damage by ESD? |
| value of resistor | I NEED HELP FINDING THE VALUE OF RESISTOR R218 AND R217 IN TV GRAETS NR GR 29PFT33
PLEASE HELP ME
|
| Bush DVD1005 - resistor burned | I currently have a Bush DVD player, model DVD1005, which does not work. On investigation, a resistor |
| AKURA ACHTS02 Value of Resistor R75 required or Cct Diagram | AKURA ACHTS02 Value of Resistor R75 required or Cct Diagram. Resistor has burned and value not known |
| RESISTOR PROBLEM | HELLO, The first thing I would ask is what the amps total of the circuit would be that this fuse is |
| burnt resistor | hi
I'm working on a panasonic tv, model: sx-1
I need to know value of resistor r833, and valu |
| Samsung ht z310 home theatre repair resistor | Hello i have a samsung htz310 that says protect whenever i turn it on and shuts off, so i decided to |
| Panasonic PT53WX53G Schematic/Manual (Resistor Values) | Hello,
I was replacing the convergence chips resistor banks and I have the values kinda messed up |
| Re: monitor trouble | [quote:75dcb63558="gogo"]I have a problem with my monitor - the red color turned black and the green |
| parts info | James, you can order parts from tritronics, just enter their name on a google search and then log on |
| Bush ws6671sil - 11AK19Pro chassis - Help needed! | Hello!
First off, this site is probably the most useful electronic repair site I have come across. |
| resolder all joints in the line output stage, check R629 (27ohms, 1/2w 90 degree tube)(2.7ohms, 1/2w |
| L7031LD Likom Monitor Help | I have a Monitor marked L7031LD Likom, with a R781 complete burnt up, and i need help with R781 valu |
|
|
| Thanks for the help!
The set deguases when switched on but doesn't make any tweeting noises. The |
| Fujitsu Monitor FPC-CRTAAD | Hello to everybody out here in this forum,
l would like to seek help with the above.
l have thi |
| The 'K' as part of the resistor specification represents tolerance. I think from memory it is +-10% |
| dont forget to change low ohm resistor off flybackthat feeds the voltage usually 26volts to the vert |
| Toshibas and the like | Hi there Larry and Tibor,
last night I repaired my Toshiba. Larry, you are completely right, the |
| TDA4600 | :D [b:55c6377585][i:55c6377585]WHAT YOU NEED TO DO IS CHECK THE VOLTAGE AT PIN 9 OF YOUR TDA4600(ABO |
| Re: Thanks | [quote:6b11c9cf9b="chrispknight"]Perhaps I will have saved myself from having to spend 200 bucks on |
| well, I have to agree with Larry, on a lot of his points.
Just so you can get an idea, im in the |
| Sony Trinitron tv | Hello,
This is quite shure the "East-West" correction stage which is not working anymore, this ca |
| Yes, if the discharge is of high enough energy, but in normal circumstances - such as those which ca |
| Service Manual for PC monitor Fujitsu FPC-CRTAAD | Hello to everybody out here in this forum,
l would like to seek help with the above.
l have th |
| I removed the main board tonight. Was able to get a good look at all the components and access the |
| thank you | Hi all, thx very much. I rang up the local Sony part supplier and bought KRC103S (costing less than |