| Subject | Text |
| Hello my friend
I repair a long ago a panasonic other model with power suplly damaged and then tur |
| ALL GRATIS | I have, I send gratis. Give me Your email addres.
Mr., I look for for the following objects:
M |
|
|
| Repalce the caps on the pip board or pull the pip brd out and jumper pins 5 to 11 and 7 to 9. |
| this model has a problem with jumper under plastic molding covering hyper board.when this goes bad i |
| more details please | Can u tell me whre the jumper is located. Is it in the remote or in the TV? |
| Sony DVD Palyer with "No Disk" code | I do have the same problem as you did. On the schematic manual of another Sony DVD player it has bee |
| HP LaserJet 8100-8150 SERVICE MANUAL rar files missing | HP LaserJet 8100-8150 SERVICE MANUAL.part02.rar
goes up to
HP LaserJet 8100-8150 SERVICE MANUAL.p |
| philips 28pw6515/05 | Dan, the problem is the painter chip.
It's on the small sub board, located upright at the rear le |
| SANYO TV- Model AVM-20MB | Hello! anybody there who had tip for for this TV problem? sound and picture appear & disappear w |
| I really don't know to much about recievers but I've allways fixed my own thanks to theese boards. I |
| Blown Fuse - Troubleshoot Why | I have a Dual TG28 reel-to-reel tape deck (1964) with a blown fuse (315ma). I am not able to determ |
| Re: Blown Fuse - Troubleshoot Why | [quote:dffa48c5b5="huntro1"]vtech,
Thanks for your reply! To answer your question, above G1 and G2 |
| Laptop LCD | Well, i assume you have tried decreasing your display settings while connected to a monitor and then |
| Red Key Lock Symbol | I have a problem, yesterday morning, we had a power outage. When the power was restored the settings |
| Samsung PCJ534RF Service Manual | Hi there
I have been searching for days for a Service manual and or schematic for my Samsung PCJ534 |
| EASY ADD YOUR SLAVE HDD | Easy, remove the jumper installed on your Seagate hdd, connect the WD on the extreme connector and t |
| Thomson #242740 ac adapt./bat.charger | I was hopeing to recieve some help in finding out if a diode might be the problem. The battery only |
|
|
| [quote:471a398565="miked73usa"]Removed the pip completely, cut the brown wire. TV WORKS!!!!! [/quote |
| SHARP | HI MARIO
IVE GOT THE SAME NAME MYSELF,FIRST OF ALL WITH OLDER SHARP TV YOU WILL HAVE |
| So you dont have a set of schematics for this board then I take it?
And you say the Schottky was |
| relay, amp | If the relay is used to disconnect the speakers from the amp during turn-on, it also monitors DC vol |
| You fool! :lol: You said 15 volts was OK, although you had said it was on a different connector.
T |
| Re: Studioworks 775n (CB775BN) brightness adjustment??? | [quote:d427f3d2dc="Benjovy"]Hi all,
My monitor brightness controll is 100% on the OSD & my moni |
| new 5.8gz phones /phonelines/phone wont ring...old 2.4 will | i have been through 3 5.8 phones and need to change over because of wireless equiptment. my phone li |
| Sharp XV-C1E Service Manual needed | Hi to you all,
I'm looking for the service manual of the Sharp XV-C1E Beamer.
Lookin for it for |
| bypass bios password | i baught used dell laptop c600 i forgeted its password kindly if any body hae knowldge plz tell i m |
| No audio | I just changed the jumper and all is fine now!!! No need to change the Q330. |
| I'm looking to see if you HAVE or DON'T HAVE 12 volts DC at Pin #1 of J3 (or pin #9 of CN2 at the SM |
| Sony kv32-cs76 service manual needed | I desperately need the service manual for my Sony kv32-cs76 100hz tv set. I played around with the |
| Help me with TV ILO model DTV2784 | I need settings for service mode (Items value)
Thanks!!![color=black:652f8dfbb1][/color:652f8dfbb1] |