| Subject | Text |
| Looks like a 27 meg RC control. There is no programming involved
as the operations are already pre- |
| NEC Lcd1960 nxi TFT Monitor Circuit Diagram | Does any one have a copy of NEC LCD 1960 TFT monitor Schematic.
Thanks
Theo Laird |
|
|
| Re: sony cmt cp101 low audio levels | [quote:6cea765a27="dar"]I read this on Wednesday, ordered the transistor on-line as suggested, got t |
| In some languages, in particular french, DC is written as CC (courant continu).
Many years ago, |
| Buzzing sound coming from speakers/amp/satellite box...? | Hi. I need some help. I have my satellite receiver box plugged into a pre amp, which is connected to |
| [quote:9df6dae0d3="vtech"]There should be no hum whatsoever when you turn counter- clockwise all the |
| OPTIMUS ST AV-3260 RECEIVER ON - OFF PROBLEM | I GET SAME PROBLEM WITH ONE DISCARD FORM OTHER TECHNICIAN/ MINE HAVE ALSO OK THE RELAY/ ETC/ MINE SO |
| NEC PX-42vp4g | Further information on the power supply in the Further information on the power supply in the NEC P |
| sony cmt cp101 low audio levels | Hi all,
First of all I confirmed that the Q330 power on muting transistor was at fault by substitut |
| I am not sure I understand what you are seeing there? Perhaps you are new to serach on the net.
Scr |
| xbox 360 at just $200usd | BUSINESS PROPOSAL LETTER.
We have all brands of Mobile Phones,Ipods,Sidekicks,Nextels phone,Laptop |
| No when the pre outs are unplugged the noise dissapears. |
| If any part of the mic system has a FCC id number on the nameplate, you can do a search at https://f |
| THERE IS NO RESET CODE AS SUCH. YOU WILL HAVE TO GO INTO THE SERVICE MENU AND UNDO THE CHANGES YOU M |
| Analogue radio repairs | Radios for hard to fix radios
GP300:
Fault…. Doesn't turn On (Dead radio)
1/Check Fuses
2/Resold |
| As stated above, a contactor must be used on the voltage / frequency it is designed for. the coil o |
| Fixing a volume knob and headphone jack on an Audio Kontrol | I bought a Native Instruments Audio Kontrol 1 new a few years ago for recording to my PC. The proble |
|
|
| protection good, now on to output | Thanks to Mitch & vtech for help with replacing the resistors. Now my reciever doesn't go into p |
| Blaupunkt Frankfurt Schematics input | Specialists,
Does anyone know the input schematics for a external casseteplayer. This is for a 19 |
| Re: sony cmt cp101 low audio levels | I read this on Wednesday, ordered the transistor on-line as suggested, got the part this morning, re |
| need datasheet for Nordmende Othello stereo U320 or 0/632 | hi folks,
i'am looking for the datasheets or a service manual for my radio Nordmende Othello stereo |
| Harman Kardon amp displays "PROTECTION" | Harman Kardon amp displays "PROTECTION" when function buttons are selected. It appears to |
| Plantronics Gamecom1 - Snipped Cord. | [size=18:9cb2257a7b]My Dilemma[/size:9cb2257a7b]
[size=14:9cb2257a7b]Hello. I have an audio remot |
| Denon PMA-777 | Hello to all,
I'm working on repairing a Denon PMA-777 amplifier.
One channel is working but the |
| Ericsson DECT DT200 and BS230 | Hi everybody,
I'm repairing an Ericsson DECT phone that has a intermittent problem on the mic.
Do |
| it could mean that the data isnt available, but since memory only holds so much, you may be able to |
| 8) That's cool, I did exactly the same when starting with electronics, altough there wasn't an Ipod |
| Does noise continue if "pre" is isolated (unplugged) from "main?" |
| hameg hm604 | Hello
I am also looking for diagrams
In fact some pages (Y pre amp) are lacking on the file avail |
| Hi G Money..
Are you conected to the correct terminal on the P.C.?? (Preferably "Line Out?")..If |