| Subject | Text |
| Possible to use any power adapter with 220v/50hz? | OK, I have a quick question... :)
Why do some "wall wart" power adapters (transformer from AC to |
| Thank you vtech! I appreciate the encouragement.
No, I'm not a dealer, I'm just a guy trying to |
|
|
| Sony KP-53S75 Convergence? | 1. First the set was dead
2. I replaced the Power Supply board and was able to power up successfull |
| Re: Brightness | [quote:55f2884649="Mel"]If you can go to the menu function with the remote and adjust it there, you |
| Re: SABA | [quote:48d591f1f4="omegald"]I need service mode procedure for the same product T70170RI. If anybody |
| Re: Please help : My Panasonic television isn't well at all! | [quote:f7573fb424="ArthurLee"]
My questions are
Does this sound feasible (ie dry joints)?[/quot |
| Digital TV | I just purchased a SONY DLP HDTV LCD TV.
Plugged in all the wires, etc, the picture is fuzzy, n |
| Horiz output | Ahh I get it now,
I would like to scope the base signal while lamp load is on and measure frequency |
| When it comes to blown audio output circuit, there are no safe bets in anything. especially dealing |
| JVC TV not responding to remote. | I wonder if anyone can advise on this please? We have a JVC TV model LT-42TG30J. It will not respon |
| Have you tried adjusting the picture from your pc's display card driver settings?
I think you can |
| re; Sony service mode | Hi, If you don`t know how to access Sony`s to bring up the service mode
then you should NOT be atte |
| The wire wrapped around the tube you refer to sounds like the degaussing coil. This is used to remov |
| Thanx for the part numbers!
Is there anywhere in Canada to buy these parts I need. I'd like to stay |
| Thank you, Darko. That was very helpful, but not fully.
I'll try to explain what my problem is...
|
| Reset to factory settings - CRT Toshiba TV to fix problem? | Good Day,
I'm trying to give a Xmas present to a family member. He lives in the country and has per |
| Hitachi 36UX01 problem | Hi,
I've got a problem with my Hitachi 36UX01. The sound is OK and it reacts on remote commands bu |
|
|
| Start with a good visual examination of wiring, check boards (especially area around the audio circu |
| Alright, so I replaced the blown 220uF cap on the Tuner board, as well as 5 others that were bulging |
| if the standby light flashes when you press a button on the remote try this trick, press down button |
| the manual stated that the remote has a converg. code inside the batt compartment, is that what you |
| forget it, they are board level repair or mech complete.
need to align with sharp service remote af |
| no power to hdtv | hi. this is my first post. i hope someone can help. i have a 2 year old samsung hdtv. model tx-3096w |
| sony kp-53s25 | 53 inch sony tv with no pic and no sound.the sandby light blinks 40 or 41 times. i know the problem |
| jvc service mode | get a JVC remote and press i-Display with mute that will bring service menu repeat the same to bring |
| service mode | I have just had the same problem, i managed to get into service mode, and now i have done somthing a |
| APEX 20" COLOR T.V. SET MODEL # AT2002 | MY APEX 20" T.V. SET JUST WILL NOT TURN ON BY PUSHING THE ON BUTTON ON T.V. OR BY USING THE REMOTE. |
| Re: SERVICE MANUAL TV SONY KV29XL70E | [quote:2ea7e7ca97="stefafog"]I need technical manual to enter in service mode for TV Sony KV29-XL70E |
| Tecnimagen 14TXS - Can't change sound from 5.5MHz to 6MHz | Hi,
It's been a while since I last did sound conversion on a TV set. Living in Spain, I used to g |
| Re: MCX-1000 No function | [quote:7482766381="Drdave"]Thanks.
Already talked with Allen,and he thinks main pcb,but on somethin |