Subject | Text |
Sony KP-53V25 Problems | On your TV, is it the board on the right if you're looking at the back of the TV, or is it the board |
Re: HITACHI C28W410SN | demagnetise crt or live tv off for 1hrs and switch it no it should be ok
[quote |
|
| :D The soldering around the regulators is a stock fault-you may also have to resolder the field op i |
Re: Datasheet RS2004FS | [quote="sonyk70"]Hello, where i found the datasheet of RS2004FS?
Many thanks, sonyk.[/quote]
New |
T664 service mode | I have seen this procedure posted in many places but it does just not work!!
Preset a station |
vhf transceiver pae 5610 | Hello, I need the service manual for the "vhf transceiver pae 5610". It is a solid state 7 |
| :D CHECK IF YOUR SET HAS "AK-19" ON THE BACK PRINTED LABEL WHERE IT SHOWS THE MODEL NUMBER OF THE SE |
| First check the vertical output IC for poor solder connections and check for leaky capacitors ( loo |
Help desoldering power connecter from system board | have a broken laptop. The only thing wrong with it is that the power connector is damaged. A big box |
| Hi! Please help I have PHILIPS 27CS6895 ( not have user manual of it)with same problem, I have repl |
| i would like to add at this stage resoldering of the memory chip on this module is very difficult ev |
Ericsson DECT DT200 and BS230 | Hi everybody,
I'm repairing an Ericsson DECT phone that has a intermittent problem on the mic.
Do |