Subject | Text |
| Hi!
First what comes to mind is that power supply had gone bad. And so it
can be 2 cases:
1)The |
pnp npn transistor | excuse me for my bad english..
For test npn you have to use a multimeter and put positive lead to b |
|
| hi,
many thanks for replying.
is there a way to test the fbt.
the horizontal transistor see |
| There probably is a bad connection between the LCD and driverboard.
Open the clock en gentley pus |
| Indeed, YL2F-18C868-CA is a typical Ford part number. The first four digits tells which Ford factory |
| Hi all,
Sorry had to create a new account... created one when I asked for the code for the OEM Ph |
| Replace DP53 and CP51 with NEW components. They will check ok on your multimeter but will be probabl |
Grundig ST-70 574 SAT--CUC 5820 | I make a post a week ago about a thermic problem, problem who now it is turn out to be a total failu |
Acer hates AC power! Is ok only with battery | Proud owner of an Acer Aspire 1510 series that I am :D , I keep resoldering the power jack back into |
| Thanks for your quick reply, TITANIUM, but I'm afraid I do not understand well, how to import the di |
Re: VW radio Navi system code | [quote:b74ecdae16="mishka1675"]My dad bought Passat 5, but after batery change, the radio asks for a |
| You need to check the output transistors for shorts. Test the forward junction voltage drop with a m |
Sony KV-X2982U | Similar problems to another post on this site.
When switched on, standby light comes on and stays |
| [quote:70ec19bc91="ShaGGy"]Does anyone have access to the EURAS Internet System (http://www.euras.co |
| common problem caused by condensation, take radio out of car and put in a warm place for a couple of |
Aiwa Tv, Model No TV-C201KER is not turning on, Help Plz. | Hi, I have Aiwa Tv of Model No TV-C201KER, but now it is not working, I have checked the power cord, |
data sheet | I was delighted to locate a data sheet for my MASTECH M-830b multimeter.
I have blown R5 and R18 an |
|
power problems | Check the High Voltage Transistor and the Voltage IC it is most likely one of those. The Transistor |
Philips monitor 107G51 power supply | Hi, can somebody help me with this monitor, in power suply unit one IC is burned . I can see only 4 |
| [quote:dbd9198acf="BigPablo"]Radio want four digits code.[/quote:dbd9198acf]
Better change the co |
Sharp 51DT25H stuck in standby | Hi everyone. I'm not a TV repair engineer by trade, but have been landed with a Sharp 51DT25H to rep |
| if you have a multimeter i would suggest you check any other transistors around the one you replaced |
remote control URC24 | Hello,
These universal remote works fine on most devices !
First, you have to program the remote |
| [quote:a4a3356f7c="gary"]set is fitted with vestel 11ak45 chassis. go into main menu and press 4725. |
Re: Please code Clarion (Peugeout 406(2001)) | [quote:03bf6840d2="Kozhykhdmitriy"]Hello. I need a code with 4 digits to unlock my radio.
Model:Cl |
Lacie External DVD-RW Power Supply | Hi guys,
I purchased a Lacie External USB DVD-RW with no power supply. I am able to build a powe |
27ax1b no power | I've got the same set with the same blown c724 cap. The HOT tests OK with my multimeter. I'm not fi |
| Thanks mate, another question if I may, do you know what features the numbers refer to as I have a c |
| [quote:0be7f001a9="Anonymous"][quote:0be7f001a9="jts1957"]What is "stucked mode?"
What i |
| [quote:ea05ed1acc="geronimo2"]Many thanks; I can see the two numbers on the picture, but the radio/C |