| Subject | Text |
| Try looking for a trimmer resistor to adjust the tape speed. |
| Sony SLV-X810 VHS VCR - Will not rewind | My SLV-X810 will not rewind, either in play mode, after stopping, or by pressing "high speed re |
|
|
| ENCAD1200i,only sold at 9600USD | Hello everyone,
we have made our own ENCAD1200i large format printer,which is of low price but has |
| Sony KV-35v65 hv short | Many people distribute a parts kit for this model of television. It
includes a dual power supply t |
| okay here are the readings from the power print, does not look good.
incoming power is 50 V AC on |
| If you have no experience in tv-repair, YES you should be very carefull when soldering on the inside |
| about yourt.v set | well if you have replaced the power supply and you have your 5volt stand by ,there is one other thin |
| [quote:3abd774048="awright"]Well, yeah, you are messing with relatively high power equipment and can |
| some tips | Hi did you check menu settings of your tv? ok try press3x channel if does not off... if not, check y |
| @Guest | @guest who recommends to replace all caps of the vertical driver unit
Okay, I agree that might be t |
| !! RIPOFF !! HHY - HASMUKH SHAH [email protected] | attention,
this guy tries to ripoff people here by trying to sell
the searched manbuals (for ext |
| Sony PS-X50 turntable service manual or advice | The speed of this turntable wavers a bit. Any help with which component to check would be great. A m |
| How to know the Vcc of a non commercial Ic | I baute a used HITACHI motor it has a shaft encoder - like the one in the mouse that the mouse ball |
| Roadstar CD 942 DVD do not read disc | I have problem with this cd audio, some time he read disk some time do not.I tray with new disk and |
| NEC Multisync FP950 or FP1350 schematic needed | After some sparks (I heard), the image has gone, now just the front led is on :(
Where can I find |
| Nitrogen Laser Power Supply (ignition coil) | How's it goin, I am trying to design up a high voltage power supply for a nitrogen laser using the c |
| Philips #27PT6441/37 Will Not Turn On! - UPDATE!! | I finally took it in to a shop for repair and saw [b:2d120d15d9]FOUR[/b:2d120d15d9] sets JUST LIKE M |
|
|
| Oh, if u want to add more fans to the same power source, u should connect them in parallel:
12v + |
| DMA Setings keep changing to PIO | I have an issue with the DMA settings changing to PIO. If I uninstall and reboot the Primary and Sec |
| Re: Windows Xp? | [quote:6fc67db01d="logankalo"]I research [url=http://www.seagate.com/ww/v/index.jsp?locale=en-us& |
| SONY WINDAS V710.1.2.6 wanted ! | As in subject for the GDM-F400T9 monitor.
As you know this series of monitors has a serious con |
| LG RZ-20LA70 LCD TV | A 20" LCD TV recently came into my hands that unfortunatley is just out of warranty. The unit stays |
| Probably you blew the switch-mode transistor in the power supply, it would have also damaged the dri |
| epson stylus c44ux service prog | Can anybody help. My epson has started to give me stupid messages telling me he's tired and in need |
| FOR SALE TOSHIBA M200 WITH DIFFERENT MODEL OF LAPTOP | EMAIL CONTACT:[email protected]
General Platform Technology: Intel Centrino System Typ |
| Re: Please code Becker | [quote:baae2b7ec8="dekie36"]Please code for my
Becker traffic pro high speed
model BE 7820
SN 450 |
| an interesting discovery re: zener diodes in power supply | In the Troubleshooting section of the manual, shorted zener diodes across the driver transistors (in |
| Re: Sony TV KV 32TS46 | [quote:e5a9c0f057="Ray"]Sony KV-32TS46 TV , Q601 , Q602 (2SC4834) replaced, Q591 (2SC4927) HOT repla |
| Can you hear any high voltage, when the TV starts?
if not, try to measure the secundairy voltages |
| I'm turning one Printer Epson LX-800 into one b-printer | I need to slow down the carriage or all the printer mecanism in order to
use one device that marks |