Subject | Text |
conv 9-1690 | Just fixed one of those 1690..service notes state replace ic s .. I would check r4151 1k off pin |
Yamaha RX-V520 Main Speaker not turning on | Hi,
I have a Yamaha RX-V520 A/V receiver which up until recently worked fine. About a month ago o |
|
Protect LED | My Hitachi 50FX30B had been dead for quite a while, but this weekend I took some time to go over it |
Ford Orion Stereo wiring | Hi, I trying to install a GOODMANS stereo into my 1988 Ford Orion, but the connectors dont match, an |
| I was just given an Viewsonic N3252W to try and repair.
It was working for a while on tuner mode |
a little xmas spirit from father christmas?? | hi there all
i have matsui 28dw01 ditv unplugged for a month now asks for a pin
have took a copy o |
dsc-t1 repair manual | I have the same exact issue- the pin fell out and the menu button are inoperable. PLEASE HELP! |
jvc29ts1en has flybacklines and stobe effect after some time | I have a JVC 29ts1en that works fine for the first 10 or 20 minutes. Then it starts showing fly back |
| I don't think IC's involved. You say your picture is now OK. I presume you installed the correct IC' |
KEF PSW 2500 relay buzz and audio outout buzz | Have just repaired a similar problem with a KEF 2500 - relay was chattering at 50 Hz rate, buzz in s |
Help Needed PDP TV plasma tv. PDP-4201? Wont turn on | I bought this from a friend recently as a project to fix and possibly sell on, the tv can be seen he |
| sorry the neck board is located on the back of the picture tube.one of the connectors will supply 20 |
re; vertical | Dietrich, I`m in USA so I don`t recognize the model number the
vertical IC will be 6-7 pins probabl |
| that little pin has a flathead, right? It actually drop right into the optical block assy. on the fr |
VIEWSONIC MONITOR (VE710B) | I have a unit that has had the 15 pin connector cut off (otherwise fully serviceable unit I believe) |
Re: The problem root cause. | [quote:d7257a27c8="Raligh"]Replace 2 capacitors on the board right in the middle of the back of the |
Resource database for technicians... | Some useful functions of pinout.net
1.Info for various types of connectors and cables – web searc |
|
ford focus | hi i have just changed my ford focus factory stereo 5000 rds eon for a ministry of sound head unit b |
Please anserw very fast!!!!!!!!! | How i can reset my Sharp 54at-15sc it is asking pin code but i have forgotten that. someone pliiz h |
How to "unlock" a Ferguson... | Hi Everyone,
I am getting in touch in the sincere hope that you can help me.
My old mum has a |
| Hi,
TDA 4650 21 pin: 8,86 Mhz quarz-trimmer PAL color adjust! The trims he's bad be.
Is |
Re: oscilloscope | Thanks!
I've already found it, but thanks anyway.
For the future searches(for archive):
That bl |
| The "snap" connectors that you have to pull "up" between boards. Inspect them. W |
some one please help to trouble shoot of my Kadok CX5300 Cam | Dear,
I accidently drop my kadok camara.
I open the case and found no visualy damaged to PCB, Len, |
Soldering help needed., It don't flow right | I’ve made my first DIY PCB, I’m trying to solder Leds into the holes and I’m a complete newbe, I got |
| did you ever get one?....I am looking for the pinout of the 10 pin connector. |
| Pin - Element
1 - G1
2 - K
3 - F1
4 - F2
5 - G1
6 - G2 |
| Visual (magnifying eye) and Scent inspection passed.
Can not see any suspicious capacitors, resi |
Toshiba TP50H50 | BTW, I chose to cut away a 2" section of the plastic support tray once I had the electronics tr |
| I had to log in and say thanks for putting me on the x marks the spot...
I was on a quest to find |