| Subject | Text |
| Worked for me also. Great Job | Agatha,
Great Job my camera works well. After reading previous strings I had given hopes on my ca |
| [quote:50240f698b="Anonymous"]I have replaced convergence Ics and I can see picture without any arc |
|
|
| Onkyo DV-C601 "no disc" problem | I copied this information from another website discussion board. I hope it helps.
I too had the |
| Yeah, I thought there would be a screw somewhere, but I can´t find one at all. Very strange. |
| If it is the original radio of the car and you can prove that you are the registered owner of that v |
| more than likely you main pcb board has failed get a technician dont screw with it if you dont know |
| g2 | Do you know what a fly back transformer is? it't just behind it there are 2 screw plastic knobs it's |
| [quote:a165cbb214="gary"]CHECK THE LINE OUTPUT TRANSISTOR Q533 FOR SHORT CIRCUIT, IF IT IS SHORT REP |
| Relay. | Minnie I hope the reply was to me on the power light issue. Can you tell me where to look for the lo |
| Microwave | If you heard a "POP" and now a loud buzzing noise, it's one of 3 things
1) the rectifier diode on |
| Now its 100% I'm glad I didn't go out for a new laser... There is also an alignment screw on the sid |
| more info on replacing the parts directly | I have some help to give if you have the exact same problem.
When you power up the screen, brief |
| I'd try the flyback. First discharge the anode cap by taking a screw drive w/insulated handle and ho |
| There are no blink codes in your service manual, but some other sony model has blink codes. http://f |
| Taking apart my Philips DECT 2111S/11 | Hi,
I am trying to take apart my Philips DECT 211 phone, because the speaker has managed to come |
| [quote:103db9104a="jts1957"]Possibly IC401(LA7841L) ?[/quote:103db9104a]
I've found IC401, but it |
| Screw that, Toshiba has got them back in stock! All three, 13, 14, and 15's. The caps Cory is referr |
|
|
| I'm fairly certain it isn't external interference because it's not an intermittent problem and I've |
| IL 60 toggle switches | Thank you for all of the posts on the bad resistors. I have one bad sub and I am hoping that is the |
| [quote:ecc20bc205="minnie"]You need help! I will post that note a post what I ment to say and hope a |
| Only thing I found in the manual that relates to the specific place is this image...!
[img:f4aac6 |
| William I got mine fixed. I will try and walk you through the process.
I recommend having a power s |
| Jumpers, especially at locations 010 and 050 - resolder. Check F850, F852, F853.
Wherever it says |
| Another device: it is called Omega series 1000 NIBP. BP stands 4 Blood Pressure. It is a device used |
| Intercom buzz | Lots of faults can cause buzz, but no ground or poor or corroded ground connections on shields is a |
| sharp sx80h9 repair | Hi, I was given a sharp sx-80h9 to repair. I am quite a beginner at this.
the owner told me it ha |
| some other issues | OK, so I fixed what I could. There was no shortage between legs in this IC, so I assumed it's good.
|
| Just Opened it Up | I just opened it up. Too bad though i was referring to the manual in print. The quality's not that g |
| Maybe there is a screw on the bottom or maybe just clips on the top.
Have a look underneath, if th |
| Thin, about 12 pins, screw thru it, on a heat sink Mitts start usually with a la, ie la7838, la7845 |