| Subject | Text |
| bose audio system | hi guys i been having problem whit my bose system the cd player was working one night and all of a |
| Magellan 315 GPS data/power cable | Im trying to repair a broken data/power cablem for a Magellan 315 GPS. Does anyone have the pinout f |
|
|
| convergence problem | If this is that model which has a convergence module to the side ??????
check the 1 ohlm resistors, |
| turning it off and back on clears this up?
sounds like it may be a DCU problem (digital convergence |
| Thank you vtech for taking the time to clarify this. If I knew a local tech that I trusted (and assu |
| Ampex quad heads | Check out these Ampex quad erase and audio head assemblies on Ebay. They went before and after the v |
| Help needed repairing a Ferguson set with TX80 chassis | Hello all
I desperately need help repairing my wife's TV set, it was given to her by her late gra |
| Hi, HeVi !! - Re: HP Laserjet 4L can you clarify ? | Hi, HeVi,
Many thanks for the advice but could you please clarify...
I'm sorry but I'm a bit thi |
| Sony KP-53v25 wont turn on | My projection TV is a 1995 model Sony KP-53V25, Great TV up till yesterday.
You turn it on and t |
| Need schematics - MAG DX15T monitor | i have her e a monitor wich had a blown HOT, replaced ik with a other . but the screen is now to wid |
| KEF PSW 2500 relay buzz and audio outout buzz | Have just repaired a similar problem with a KEF 2500 - relay was chattering at 50 Hz rate, buzz in s |
| Also, I think The_AntiRAM is on the very right track here as well. If the "garbage" is mov |
| tech tip rca tv itc008fam | need tech tip on rca tv model 27r410t chassis itc008fam. won't power up. voltage drop on secondary s |
| Ricoh ft3713 | Image copied is legible only partially at the right side of the page.I've done over a hundred copies |
| Not even a late-comer? Good god this place is a ghost town.
All the capacitors in the area check |
| same here | Same problem here on a z46z83d8, havent been able to track down a service manual as of yet so flying |
| Thanks for your post Henrik - very interesting. I don't think I'll be rushing out any time soon to |
|
|
| Re: Display | "7) I then soldered back those 2 resistors and bridge wire."
Sounds like you're on the |
| re; width problem | Dietrich, this ones a little harder, check solder connections in and around the horizontal output tr |
| Re: Service manual or schematics for HP Pavillion notebook | [quote:8e5104880d="johnc"]Hellllp! I need a source for schematic or manual for HP Pavillion laptop. |
| LCD repair | There are two circuit boards inside and one has a metal cover screwed over it. Carefully covering fi |
| Hitachi TV switches off and back on randomly | I have a Hitachi C28WD2TN TV that is coming up for 5 years old. It has started turning itself off an |
| Sony CDX M800 rebuild, Faceplate timing issue | I have a sony CDX M800 headunit and the faceplate wont close properly.
The motor turns the gears ar |
| ARCAM- A&R SA200 pwramp - daughter board cct available? | Request cct details of the daughter PC board, mounted on the rear of the front panel of the A&R |
| If you get no joy-:
Why not get a wire wound potentiometer, say a 1K or so, put it on it's highes |
| ripped off | my philips 28pw6332/05 t.v. broke down and it cost me £112 to get it fixed
but when he gave me |
| TV SET REPAIRS | :D If you are in any doubt as to your ability to undertake any tv repair-dont!!!
There are certain |
| power failure | what's the cause for letting no power in the secondary side of an SMPS power supply. there is power |
| Mark you're on the right track. Try replacing your convergence ic’s. Don't forget to check the bias |
| Re: 37" Magnavox LCD | [quote:dd0cac9a04="kecwc21"]Model 37MF321D/37 TV with power board 715T2056-1 issues. Capacitor at p |