Subject | Text |
| R509 can be seen in the power supply schematic in grid C6, page 36.
You can get the manual from h |
akai 2161 | can u help me for repair akai ct2161 ( tips and triks ) please
and if u have track record problem.. |
|
Need help with replacing a board in a lg plasma | Hey guys
I just joined up here. I was given a LG plasma t.v (42PC3D) because the screen stopped |
| have you checked the hot transistor.i should also check diodes etc on secondary side of chopper tran |
enclosed pictures | The 1st time the replacement transistor was fitted the insulating washer must not of been fitted cor |
| [quote:d7e50bb691="georgeNCSUee"]
I now know that the spindle motor is probably the cause for it |
6 cd change player bose system in 2003 nissan maxima | The 6 disk cd player no longer works. I can this as an error CD ERR F0. I can't play any of the cd |
| Possibly a line timebase fault, no line drive, vertical scan. A check with a test meter should put y |
leoptics 15c (Picture sides bent inwards ) | Picture sides bent inwards
asking for,
brand=computer monitor- leoptics
model= 15c
problem= dea |
Service manual for Onkyo PCS-207 stereo system. | Hello,
I am trying to find information about power transformer used in PCS-207 personal stereo syst |
| that little pin has a flathead, right? It actually drop right into the optical block assy. on the fr |
Sony Compact Stereo cmt ed1 servicing manuals | Sony CMT ED1 compct Stereo system CMT ED1 1997 onward
Hi I need servicing manuals with circuit and |
ICC5 (Ferguson59M5) Intermittent EW bowing | Slight movement or heating of the main PCB restores normal scan. No obvious breaks in track or conne |
PANASONIC TV CT-32G11CU DEAD | Hi All.
I have a 32" Panasonic TV model CT-32G11CU, which doesn't turn on, once I press the |
| Move to the quiet side of town |
| Thanks madmatt2024 :idea:
I think you've given good suggestions & precautions, that's very |
| Hmm...I've measured resistance for both the signal wire and ground wire all the way from the stylus |
|
Sony CDP E200 monitor help | Hi,
I hope there is a knowledgeable and experienced tech out there who can help me track down the c |
| I thought as well it seems pointless to put 2 regs in parallel but they are you can clearly see the |
need service manual 43pp8545 | tv pojection philips 43pp8545 sound ok,horisontal ng, last i track touble frm mdl hor (ic tda93332) |
Service Manual for PC monitor Fujitsu FPC-CRTAAD | Hello to everybody out here in this forum,
l would like to seek help with the above.
l have thi |
L7031LD Likom Monitor Help | I have a Monitor marked L7031LD Likom, with a R781 complete burnt up, and i need help with R781 valu |
5V to 3.3V micropower voltage regulator | hello,
For a microcontroller programmer using USB port ineeded to convert 5v to 3.3V,initially one |
Adjusting CD-drive (Teac P700) | The player has problems changing tracks. Its diff. to lock on the track.
There are four or five al |
| okay heres where i am at...
I have removed the green crt board and resoldered all solder connecti |
| Thank you i found the datasheet aby the part number you gave me. Now i can wonder around the IC hopi |
re; width problem | Dietrich, this ones a little harder, check solder connections in and around the horizontal output tr |
Channel out on old Technics | Thanks RiffMaster, you were right! It's been quite awhile since I tried to trace circuits and then i |
Toshiba TP50H50 | BTW, I chose to cut away a 2" section of the plastic support tray once I had the electronics tr |
Re: Hitachi TV switches off and back on randomly | [quote:669b82ef25="Cosmo"]I have a Hitachi C28WD2TN TV that is coming up for 5 years old. It has sta |