| Subject | Text |
| latest on my set is - will never switch on (just the flashing warning mode led) if room temp under 1 |
| More like "Dealer Lock on"
#1 Turn the DVD player on.
#2 Press the Stop button on the front pan |
|
|
| Loose spring in Panasonic PV-4762 DVD/VCR - where does it go | I can see the pinch roller spring in the pic.
Looks a bit like the cass housing flap spring.
When |
| Methods of repair? | [quote:c562fb1c5c="jts1957"]Mine is into it's third year. I use at least as heavily as you, cross fi |
| Update,
The unit will playback SOME tapes but other tapes - which previously played back fine - wil |
| Contact toshiba and see if there's a software update. Only if it's not a direct view. (CRT set). |
| Panasonic Fax KX-F90, ERROR 22=TImer IC Error, Service requi | This fax was dead. I repaired the power supply. Now it's ok, but the display shows code error 22, TI |
| Grundig Parental Lock | Hi,
I have a s/h Grundig Vision 26 LXW lcd tv. While playing with the menus I accidentally engaged |
| okidata c5100 feeder unit disassembly | I started to print out a couple of laser cd labels before I remembered I had only 1 sheet of cd labe |
| Re: Compaq V75 Monitor starts then dies after one second | [quote:f5eac50de1="Aladdin"]Hello friends,
I have 3 Compaq V75 monitors that have the same symptoms |
| The pots are potentiometers like the bass, trebble and balance knobs, and any function selector li |
| there is a mechanical focus on the top of the picture tube,loosen wing nut and adjust either way.but |
| I had the same problem and I solved in this way (cut & paste from nl.hobby.video newsgroup messa |
| sony mini hifi fhb1200 | helo...
can somebody help me...my sony mini hifi model fh-b1200 have a problem, the problem is no |
| Grunding ghm9100 | Somebody Can help me.
I have got a radio model grunding ghm9100 , when I insert the front panel don |
| having the same issue as the rest of you are...
ordered the parts from pac parts (800)421-5080
get |
| DIY RPM switch | Hello, I'm Kinda new to electronics. I'm trying to make an RPM switch for my motorcycle. Any thought |
|
|
| Is this really the same convergence fault? | I also have a 42H81 projection TV that has the two vertical lines spaced on the thirds. The lines ar |
| Turn your T.V. off. That thin bright line is a full screens worth of brightness in a very small area |
| Thanks for the reply!
I do no thave the schematic, and wasn't able to find it on this site. Howev |
| Hi Vtech!
Thank you very much for your the help.
The first thing I've thought to blame was the vol |
| Philips Plasma 42pf7320a/37 | I have a Philips Plasma 42pf7320a/37 that will not turn on. It blinks out a code 7 on the front pane |
| Matt,
Well done in finding the diode! ;
Keep in mind, when dealing with switching power supplies, |
| Ok, here is an update
Spoke to Tiny £1 per min told me to do a factory reset on the plasma,
|
| IT WORKS AGAIN!!!!!! | [quote:051e666c2d="Anonymous"]having the same issue as the rest of you are...
ordered the parts fro |
| Polishing of Silicon wafers | Hi,
I have come across a technological development where we are able to develop nanosilicate |
| Toshiba 21F8XEU TV service menu | Hi I need the procedure to enter the service menu for Toshiba 21F8XEU TV (made by toshiba-elaraby eg |
| Re: Samsung scx-4300 problem after tonner refilling | try this solution:...chip resetter samsung scx 4300 scx 4300 toner exhausted firmware scx 4300 scx 4 |
| PVY4665RK | :roll: Larry, thank's for the vendor info. I will have no problem removing
and installing parts. Al |
| [quote:2be1234afc="airhead_1"]Good morning - The problems on all of the P30/P35's that I have fixed |