| Subject | Text |
| Takeda Riken (Advantest)TR4120 | Hi to all,
What a great website!!
I'm looking for a service or operator manual
for a Takeda |
| Can anyone help identify... | Hello,
I apologize in advance for the poor pic as it came from a small pic in a magazine scan but |
|
|
| Need Schematic for Sharp 21v-u63 CRT tv | Hi guys. I need a schematic for Sharp 21V-U63. It showed vertical sweep collapse (horizontal line o |
| Horiz output | Ahh I get it now,
I would like to scope the base signal while lamp load is on and measure frequency |
| [quote:6bf443bc09="Anonymous"]OOPS... p/n I replaced is [b:6bf443bc09]23786221[/b:6bf443bc09]
Phi |
| The relay is doing what it's supposed to do and is not your problem. This could be:
(1) a solder ( |
| Toshiba TV trouble; please help | I have a Toshiba TV Model CF27E50, chassis TAC9516
There was a problem which I have identified as |
| Magnavox 17MD255V | I have a Magnavox 17MD255V LCD TV that I installed on my boat. It works great, but I have one proble |
| Hello, I need operating instructions and schematics of the Metrix GX933 generator.
Thanks in advan |
| [quote:bdba5ca32f="vtech"]Remember;
When talking about "impedance", it is actually the |
| Look through thesev and see if a plausable match exists | JVC AV2000 N/A NO SOUND OR PICTURE - BUZZING SOUND FROM SWITCHING XFRM. - HIGH VOLTAGE BEINGS TO COM |
| Technics ST-03C | The so called AM Syntheziser part in this Tuner does not work correct.
when i use the Rxfreq. 549k |
| Please anybody have this code generator? I dont have the code because the new models of audi dont ha |
| I went through and tested every capacitor, and pulled about 10 off the board before I realized that |
| If we're talking CRT monitor, it could be that the signal gun isn't off during the sweep return.
Ag |
| Citroen C3 | Hello all!
Please help me whit a service manual for Citroen C3. If you don't have a link, I need |
| PVQ-2512 Panasonic TV | I have a PVQ-2512 Panasonic TV. Recently I saw on screen just a horizontal line.
Is that meaning th |
|
|
| Remember;
When talking about "impedance", it is actually the resistance of the speaker |
| Damper Diode Question | I have a sharp microwave that cooks on high regardless of power setting. I've traced the problem to |
| AV-27820 | Hi there... I'm having some troubles with the vertical sweep on my 32" JVC AV-27820. I think it's th |
| Service manual needed for Fluke/Philips PM5515 PM5515 PM5518 | I needed for the manual of service in pdf of the pattern generator for tv mark Fluke, the model is P |
| I found out what it is | Ok the first guy whom was paid to come out and look at is was 100% wrong I finally got a place from |
| It's not the picture tube. Probably a connection problem with the horizontal sweep or power supply |
| If what you're describing is a Vertical Foldover ... Bad electrolytic in Vertical sweep circuit. |
| no no, if you click on 1st TOSHIBA on that page & scroll down to 21N21.
I'm pretty sure the o |
| What seems to be the problem? We are also using same generator and would like to help you towards yo |
| If the tv suddenly got a convergence problem, then there is a "real" fault that should be |
| Base from previous observation of similar troubles (momentarily troubles resulting to permanent if c |
| This type of fuzzy line at the extreme left of the picture was a common problem formerly, it is ofte |
| Yes, there is such type of air condition.Panasonic made such type of refreshing room air with built |