Subject | Text |
| You said white line in center, of this is down the middle then it's a line scan, usually scan correc |
PEUGEOT 406 CD player | Hi,
Anyone any tips on what i could do to try and get this working? I just bought the car and th |
|
Re: STR-DB725QS | [quote:80f4106bc9="onkel.tom"]Hi Andreas
Have the servicemanual you need.
Check the solderpoints |
Beko 12.1 chassis tuning doesn't stop on strong signals | Hi all,
This Beko 14213T (chassis 12.1 with UHF only) just continues to scan over all signals. Chan |
Schematic Backlight board LCD monitor Gateway FPD1520 | Please help me find any backlight board schematic or a replacement backlight board that i could buy |
RX-V650 | It's not so much the setting of the speaker impedance switch, it's the intermittent switch contacts |
Dead chips in ribbon cables | I got one of these in for repair with the exact same fault. I can confirm that the fault is to do wi |
| Well I finally was able to do the repair on this set. I ordered the wrong caps at first. I ordered t |
| YOu can save the fuses you have left, you most likely have some shorted outputs in it. If the syste |
Monitor SAMTRON 76E | Please help schematic diagram SAMTRON 76E S Code AN17LT7l/EDC, tips, manual
service and usually com |
NEC CT 2660A shmatic and circuit layout and parts list. | I am in need of the above items in hopes of repairing my old Nec Monitor TV
CT 2660A. The set has |
Re Finlux 1000 | I had the same problem about 3 years ago with this model.
Check continuity of line scan coils..shou |
| Came across these tips for FL1.10 chassis;
[quote:c70eda226f]
Picture height cannot be adjusted |
50MP1 | Andy, I used to work for NEC and was the European Technical Specialist for Plasma displays. If your |
TOSHIBA CX2886/CX2885C | Thankyou very much for the guidance/tips. According to your tips i have checked/changed the suspecte |
Picture squeezes horizontally | Make and model of set would normally be required for more detailed diagnosis.
With the set unplugge |
| crt emission has fallen to the point where the akb circuit is struggling to compensate, any "fi |
|
| Is the standby light flashing and if so how many times. This is a diagnostic tool built into Sony T |
Dell D1626HT Sony trinitron monitor.. needs fix please help | okay. im a micro-electronic engineer student in australia and i'm trying to fix my friends monitor. |
| [img] http://www5.snapfish.com/slideshow/AlbumID=311170026/PictureID=7538994026/a=211656026_21165602 |
Projection TV turns itself off | I have a weird projection TV problem. This is a 55-in Pioneer, which turns off by itself. This start |
technosat circuit diagram | hi want to repair , power supply is dead , can not read the componnents , the receiver is technosat |
minolta manual | i need minolta ep450z photo copier manuals and repair manual
please send me these things are relate |
Need schematic Samsung SV-DVD50 | Hi everybody
I am looking for scematic to above mentioned vcr/dvd combination
och perhaps tips. |
Mag 810FD too bright | A hand-me-down from a friend. The monitor is too bright and adjusting brightness and contrast can't |
Hitachi cm810 loud poping noise, then powers off | I have a pair of hitachi cm810 that within a week apart died. They started crackling like static dis |
Re: 50MP1 | I have acquired 4 NEC 50 MP1 for free. They all pretty much have the same problem. They will displ |
Laptop Catch | Hi all
I have a used Toshiba Tecra 8000 P2-400. The catch on the lid is broken and I would like to |
Panasonic VCR Message F04 | First of all with the cover removed the start/end sensors may be picking up artificial light upsetti |
an interesting discovery re: zener diodes in power supply | In the Troubleshooting section of the manual, shorted zener diodes across the driver transistors (in |