| Subject | Text |
| Re: LG 42PX4DV Plasma TV Memory Loss | [quote:4cb48f9131="BA"]Tv loses all saved settings and goes back to default setings. :x[/quote:4cb4 |
| Vtech,
I really appreciate your input, thanks so much.
No there is no bottom access panel on this |
|
|
| JVC XV-THA30 DVD Surround Receiver Problem | Hello Techs
I have a JVC home threater model XV-THA30, upon power up, the front displays "wait" a |
| Re: Sony KV-A2911S TV | [quote:79c5707d21="robint"]Tv starts in black and white then goes into colour after a few minutes, g |
| Re: [HELP] Panasonic OPTION > PANEL TYPE > OPT 3 bits | [quote:248d1e0e46="vtech"]
Not familiar with the set but you can get a service manual at elektrotan |
| Re: peugeot radio code | [quote:da7380a6aa="masterskay62"][quote:da7380a6aa="vunjko"]peugeot 206 serial CL0410Z0151554. MOD |
| There are/were NO pencils, paper and adhesive tape where you are?
I was taught, the first rule of |
| several problems | ít's a very long range of problem...could be a ...tuner >> or RGB plate >> or pictu |
| re; RCA 195 | You didn`t say if the problem is with tuner input or video input ?
does the audio work at start up? |
| Kenwood KR-2010 | Bonjour à tous,
Je recherche le shéma de cet ampli/tuner pour le réparer.
Alors s |
| DENON DN-2600F LIGHTS ON DISPLAY, BUT DISPLAY NOT WORKING | IVE RECENTLY HAD TO FIX THIS CD PLAYER AND THE PLAYER WORKS AS IT SHOULD BUT THE DISPLAY DOESNT DISP |
| Pioneer XR-P760F | Hi...How do I pre-set radio stations please ? Just let me know direct via [email protected] |
| I need memory dump (24c02) for jvc-tha35.
Thanks! [email protected] |
| Make sure that your constant+12V is present. If this is a new problem;(used to work ok?) and going o |
| philips std by | Excuse me for my bad english.....
a lot of time ago in a philips chassis DIII (digital 3), still in |
| Sansui RZ-2500 service manual or schematics wanted | I have a Sansui RZ-2500 tuner/amp that only goes into standby mode but doesn't turn on. Any help ap |
| look for dry joints.... or you can look inside the tuner as well for dry joints |
|
|
| Re: PHILIPS VCR (VR522) - STANDBY | [quote:60b0dcf1d9="G3LMO"]Hi guys......Am using a PHILIPS VCR to run a DVD player through, as the TV |
| Help need Jog Wheel pot 288S0161 or equivalent | I am tring to get My Dod Guitar effects pedal working again and the Jog wheel Pot #288S0161 is snapp |
| Re: Renault Radio Code Help | [quote:cf49192c00="forumowisko"][quote:cf49192c00="seke123"][quote:cf49192c00="Dekster"][quote:cf491 |
| Disassembly procedure (chart) should be included with service manual. VCR cover, VCR then board if m |
| unlock children lock of tv AG | Hello Good afternoon. I have a AG TV model 9528 who asked me for a code when i push power on,like ch |
| Hi G Money..
Are you conected to the correct terminal on the P.C.?? (Preferably "Line Out?")..If |
| HI, why don't you buy a cheap tuner & use it as the referance & error feed bck. then all you |
| JVC RX-318 User Manual | Hello. I just purchased a used JVC RX-318 and have been looking, unsuccessfully, for a free user ma |
| 74F190 datasheet | 74F190 Up/Down Decade Counter with Preset and Ripple Clock
[url=http://www.chinaicmart.com/series-7 |
| E/W fault. | Most of modern sets store the geometry settings in a memory IC (EEPROM). In your case it is almost 1 |
| If memory serves, max. voltage for most three-terminal regulators is 35 volts (7805 min. voltage = 7 |
| The main reason in gluing the bigger caps is to prevent movement while the PC board travels through |
| Home Stereo Problem | Got a problem with a HCD-RXD6AV Sony stereo system. After transporting, it no longer will recognize |