| Subject | Text |
| Sanyo CE29FFV2 low HT and voltages from associated windings | Hi
Chassis in this set is the 2114 EB5-C available for download from this site.
HT is low, as |
| Re: HDTV....... | [quote:21dfb768d7="60inchhdtv"]HDTV :
High-definition television is a digital tel |
|
|
| Hmmm... the only controls on the flyback transformer are contrast and focus. |
| Re: Oops | [quote:47f9dd1463="jts1957"]Same but screen controls on focus/screen block.[/quote:47f9dd1463]
ye |
| [quote:20c42c88bc="joshg3p0"]I can test the other transistors for short. I think I did that, but I'l |
| Re: LaCie CRT: adjusting Green gun? | [quote:7cbe756ed2="Guest _UK"]Hello...
The display of my LaCie ElectronBlue 19" (Manufacture |
| First you have a 5" smaller set (50").
IKxx is the "location number" printed |
| I've had a couple of CRTs go down on Philips 32" models. The effect you get on screen is like a red |
| Bush 2872NTX - Service Mode | Hi,
I have a Service Manual, but there is no definition of the 18 possible picture adjustment opt |
| on the flyback transformer the top control is the focus control adjust for sharpest picture |
| Ford 6-Disc CD Changer | I have a Ford 6-Disc CD Changer in a 2002 Focus ZX5. It has eaten several CD's and refuses to give t |
| It would definitely help to be able to see thru the ckt with scope but measuring DC levels can be he |
| Don't forget the bias resistors also... |
| transistors, it is :) my bad.
I was measuring the voltages and my probe slipped, the transistor t |
| Make sure you check the bias resistors also. |
| monitor prob | The flashing usually means an error code depending on how many flashes and pauses I dont know this p |
| Could still be corrupted | daveyd "... It was kinda funny, before I did the reset, some of the color settings said they we |
|
|
| hello,
check the crt socket for some corrosion at the focus. if you find some bluish color replac |
| One's the focus and one's the screen. What kind of tv? |
| Grundig ST-70 574 SAT--CUC 5820 | I make a post a week ago about a thermic problem, problem who now it is turn out to be a total failu |
| Mark you're on the right track. Try replacing your convergence ic’s. Don't forget to check the bias |
| 2SC3788 on the crt brd if you had no red but, Just go into the service menu and adjust red bias. |
| Be easier to tell with a picture of a "picture" on the screen, but one of the usual proble |
| any one help me to replce or fix AFT tuning problem in tv | please help to indicate AFT replcement or adjustment |
| I figured what the heck, it doesn't cost anything to try turning that adjustment the other way, and |