| Subject | Text |
| Capacitior help! | I need to replace two capacitors in a TV that i can see are visibly leaking,i've replaced all the ot |
| re; rca dead | Hi Guys, the power supply has failed in your set(s) without the
model & chassis number how do y |
|
|
| Re: Sony SL-HF900 Beta snowy picture | [quote:74ccefc9ff="cjcath"]
Have little to no experience with Beta machines.[/quote:74ccefc9ff]
|
| This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after pay |
| resolder all joints in the line output stage, check R629 (27ohms, 1/2w 90 degree tube)(2.7ohms, 1/2w |
| THERE IS NO RESET CODE AS SUCH. YOU WILL HAVE TO GO INTO THE SERVICE MENU AND UNDO THE CHANGES YOU M |
| DVD9000... Sure do remember the beast. Very nice & expensive unit. I use to work on them ..do ha |
| Circuit diagram for Panasonic SC-HT900 | Hi,
Can anyone give me the location where I can find the cuircuit diagram of Panasonic SC-HT900 s |
| Re: light bulb broke off the wires for main display | [quote:9d1879eb2d="Dean"]I have a 1995 RX-V850 Yamaha Stereo Rec. the through the hole light bulb ha |
| As stated above, a contactor must be used on the voltage / frequency it is designed for. the coil o |
| This monitor requires bot the H-Sync and the V-Sync to be the correct way up ie +ve going or -ve goi |
| Soldering help needed., It don't flow right | I’ve made my first DIY PCB, I’m trying to solder Leds into the holes and I’m a complete newbe, I got |
| re; Mitsubishi | Hi, try inputting a dvd signal into "video input 1" then if you get a picture
it probably is a tun |