| Subject | Text |
| Sony KP-53S75 Convergence? | 1. First the set was dead
2. I replaced the Power Supply board and was able to power up successfull |
| Methods of repair? | [quote:c562fb1c5c="jts1957"]Mine is into it's third year. I use at least as heavily as you, cross fi |
|
|
| Philips Convergence Problem Help | I have a Philips rear projection 60P8341. We installed a new PTV small signal board to solve a powe |
| Sound Card Oscilloscope, Spectrum Analyzer, Signal Generator | PC version: http://www.virtins.com/SCMISetup.exe
Pocket PC version: http://www.virtins.com/PocketI |
| Sanyo STK433-330 PA Module | Hi All -
Anyone know where I can find a Sanyo STK433-330 ( 3-Channel Hybrid PA)? All I can find |
| vertical foldover problem | I'm an old tech and my niece has the same model and problem. what i found without a schematic was a |
| [quote:06b5d8a3ca="Anonymous"]Minnie,
Before I replace the ICs, I did remove the reset wire from th |
| Panasonic NV-VP31EP | Hi,
Don't be cross with me, yet ought one operators manual. :?
Istvan |
| Tatung Monitor | Hey,
I have a tatung C5DHR (DP502) 15" monitor and it works well, however at random interval |
| Sounds like a RF modulator/tuner problem. In the old days, you could repair or replace the part.
|
| vtech: Thanks again for your time and support.
I am based in the UK, and have just looked on [u |
| This is a very common problem with industrial types of power mosfets. The manufacturers improve thei |
| The two digits after the "/" in a Philips type designation can either mean a variant for a |
| Most likely, the laptop charger also has an internal fuse at the power input.
Mains plugs accordi |
| there is no real default, the adjustments are there to correct the geometry settings for each set, i |
| Sounds like a convergence problem. Go into the menu and see if you can align the cross hatches. |
| hitachi 60fx32b / minnie | I sent an e-mail to Minnie,
Minnie,
I have a Hitachi set 60fx32b that's now dead with protect led |
|
|
| Zenith | JD, first of all, what is your name? you have to pull the resistor to check it,
the video can fail |
| In the PJ area of service menu press 6 and 9 to bring up your cross hatch and see if the colors are |
| Hi guys; it´s me again and this time with good news,my vaio A-195EP it´s up and running ag |
| Is any other need to check before replacing this STR 6707 or we have to put the exact diode instead |
| Audio Oscilloscope, Spectrum Analyzer, Signal Generator... | website: http://www.virtins.com
VIRTINS Sound Card MultiInstrument (SCMI) consists of a sound car |
| Pioneer CLD-V2400 | I had a Pioneer CLD-V2400 LaserDisc player cross my bench today. The disc spindle does not rotate. |
| asking schematic and service manual | Dramatic theatre toshiba 43N9UXM,Please help schematic and service manual,Beside that I've problem o |
| System is really on the HDD? | Hi.
Are you sure that the firmware is in the HDD in that scope? I still use this oscilloscope at |
| Look through thesev and see if a plausable match exists | JVC AV2000 N/A NO SOUND OR PICTURE - BUZZING SOUND FROM SWITCHING XFRM. - HIGH VOLTAGE BEINGS TO COM |
| Pani TH-37pwd6....trouble finding info on FET... | I'm having trouble locating a replacment FET on this TV. I do not have the service manualbut the loc |
| lately found a very small printed mark G2 on the top
and identified it as toshiba TC7SET08FU
[url] |
| If you have access to "Sams Photofacts," their cross reference lists the following as usin |
| i requested for the Cross reference/equivalent for D1NL20 diode, not the Datasheet. |