| Subject | Text |
| Re: PCB2310 R133 resistor | [quote:c7f9e4e92a="Transanalog"]I don't think R133 is 800 ohm, rather 0.1 ohm. R133 on mine is Brow |
| Hi Dan,
Those zener diodes are on the BATT_SIG (D401 on BT-006 BOARD) terminal on the BATT/STROBE |
|
|
| Pins connector car audio FORD 2004 | HI,
Please, my need design for Pins connector car-Audio
FORD 2004
sn:C486690
Best regards. |
| No Datasheet found but did find....
BA6891 Features:
The BA6891 is a 64M-bit, 3.0 V-only Flash |
| KEF PSW 2500 relay buzz and audio outout buzz | Have just repaired a similar problem with a KEF 2500 - relay was chattering at 50 Hz rate, buzz in s |
| Phentermine | Nice site, good design! Welldone :)) |
| [quote:321616085f="ramjimh"]I have a HP pavilion TX1000 (TX1129ae)Laptop.There is no display in that |
| AFT coil | AFT is an abbreviation for "automatic fine tuning". The coil is part of an oscillator or band pass c |
| Eservice info | If you have a DR-H358i I'd be interested to know whether they've fixed the various design flaws with |
| WTB - Duophone 202 - Radio Shack 200 memory and speakerphone | No photo but it's beige in color, Built in about 1990 and sold by many
outlets including RShack , D |
| Yes there are free PCB software, Labcenter is one excellent design amongst others... the problem wit |
| Not to sound discouraging but, the cheap cap testers are not going to help. While it may be a cap, |
| CHANGE THE CAPACITORS ON THE +5V RAIL, DONT KNOW THE UNIT BUT THIS RAIL IS PROBABLY USED AS THE FEED |
| You Sir are an absolute legend. Many thanks. |
| Here's how I got Phillips' attention | Hi all,
Sorry to write again, but I've got a very useful update... My 27PT6441/37 had the same p |
| SCR parallel operation | Hi all,
Please let me know how to design the reactor (inductor) to use with parallel SCRs.
Thanks, |
| Well, yeah, you are messing with relatively high power equipment and can get into embarrassing situa |
|
|
| Do not have the schematic, but looking at the pictures on the net, it is not that complicated of a |
| I have worked on some Astron's before. They are rather similiar in design & have both Amps/volt |
| NEC 50 mp1 half screen problem | I am hopeful that someone in this forum can help me. I have 2 plasma monitors (50 mp1) I bought a y |
| Re: Repair tip for Viewsonic N3250W or N3235W power supply | :evil: PEOPLE [SZASZ] JUST CAN'T BE BOTHERED TO READ PRIOR POSTS (or just do a "Search" fo |
| http://edrum.midibox.org/ | If you are interested in electronic drums, visit this site, it is a must:
http://edrum.midibox.or |
| Not necessarily.... Not knowing your skills level, suggest reading the page completely. Seems like t |
| USE LEDS with 30v you can serialize up to 10,12 LEDS and that will give you more light then 3 12 vol |
| Big screen tv's,in general. | I thought i hit a GOLD MINE one day-I looked outside in the a.m.,thought i was hallucinating...but n |
| ct-32sx31 | I have the same problem. The first time to the shop a couple of parts and a fuse. I call Panasonic t |
| 32PF9965 | I have the 32 inches model with the same e-box and perhaps the same problem that you report.
The st |
| Same problem here | I had my 6441 for 1 year and 2 weeks and the tv would not power on. I did not get any green light a |
| Re: oscilloscope | Thanks!
I've already found it, but thanks anyway.
For the future searches(for archive):
That bl |
| want to build a power supply | hey guys [color=red:52718d60be]i want to build a power supply but not just any power supply i want t |