Subject | Text |
Philips 32PW6006/01 line stage shuts down after few seconds | Hi everyone,
I've got a sod of a TV set here which is puzzling me and I hoped that someone here |
| replace c840 in psu 47mfd 25v |
|
Bush DVD2004/A | Require schematic for Bush DVD2004/A resistors burnt in PSU |
| Hi, i own the same model.
I have a psu problem that im solving right now.
I found that one of the |
| 4 pin scr is 2 scr`s back to back used in swichmode psu ..(thyristors) are used but or "(sibod) Tm" |
| OK Narrowing down the problem now.
Disconnected 150V line to FBT. Put in a 60W bulb dummy load over |
| replace c840 in psu, 47MFD 25v. cures this fault in over 90% of cases. |
| on psu
cn 68 pin 6 voltage measures 5.05v
connector cn 64 measures 61.8v
cn 64 pin 10 measu |
Sony AE5 Chassis Nightmare! | Sony KV28FQ75A (AE5 Chassis).
This set came in with a blown chopper IC and 0R1 resistor and blown |
| Which transistor blew? Was it a main output transistor or smaller one in the pre-amp stages? Why did |
Re: sony tv | [quote:3dc27bfb81="leafar"][quote:3dc27bfb81="leafar"]My TV have no picture with sound,front light c |
| No ideas for the moment, but it seems to be a common fault. I know of two such AOC displays which ha |
| Again a few new questions:
item 1) Do you have high voltage on the CRT? And if so, when turning u |
PX-42VM2 | Hi,
Can you tell me which board the diode is on ?? PSU ???
Does the monitor squeel when it is |
| It is a well known type of problem with some kinds of monitors. In the past, i have encountered it o |
Bush DVD1005 - resistor burned | I currently have a Bush DVD player, model DVD1005, which does not work. On investigation, a resistor |
Re: power problems on a sony kp-41ds1u | [quote:6df13950be="kash_2005"]hi there
i have a sony rear projection tv kp-41ds1u with a power fa |
|
| Thanks Gary..
replacement of c840 in psu 47mfd 25v solved the problem.
Getach |
testing crt and line transformer | hi there,
to check the line transformer you need first to get his pinout and with an ohmeter check |
Re: Hitachi C32WD2TN was stuck on standby, now dead | [quote:f3188121eb="Anonymous"]Wouldn't come out of standby yesterday.
Today it's totally dead.
|
dell flat screen | Would a capacitor that is not making a good contact with the board in the psu cause this? |
| Also, more obviously, if you have at least one bad PSU cap, then others could be on the way out. If |
Philips TV 32PW6332/25 | Hi
The numbers on the chassis are
Back end of main chassis.
LS 32 WS DLB TH 912A1 BOF82 |
Re: Need HP s5500 | Hi All
Need help for HP s5500 mfg AOC cmc:551v chassis .
need to know how to enter to factory mo |
CF2920T LG TV, KV1440E Sony, 14GR1233/68R philips TV | need circuits for these TV espeacially in PSU section. Thank You. |
| Hi m8 thanks for your time
I'm not sure I understand what you mean, if you could be a little more |
Philips DVD712 Fault... No standby led. Player appears dead. | Hi...
Does anyone have a diagram / or experience / or service manual for a Philips DVD 712 player |
Re: vert or horiz problem? | [quote:7b7d7f4d23="jts1957"]1st - It's JTS1957 / NOT JTS1975. Oh, to be 18 again! How did we get fro |
TechLine 37" LCD TV green color instead black | >Sounds like a cable unplugged or a bad T-con board.
Cables are OK,btw what is T-con board???? |
Your dead TX100 chassis Tv | As well as the good advice given by last poster, check/replace the Polyester/Mylar Capacitors across |