| Subject | Text |
| Old TV, screen image has moved up so can't see top | Hello everyone.
I have an old BEKO TV and the problem is that the screen image has moved upwards |
| sony tvs suffer from dry joints and they usually hide inside the metal canned units .but from what y |
|
|
| Projection TV Repairs | Dear Mr. Prabadisa,
Hello there !
You have invested money in a highly advanced electronic pc |
| TVs sold under the Goodmans brand use to be manufactured by any of the well known OEM companys and h |
| eprom dump supra stv28p10 | tv name: supra
tv model: ST28p10
Chassis name: 11ak19p5 (printed on right side of board) on back |
| Sbeck-Proscan power up - safe mode | I brought it to a friend who knows alittle about TV's. He had about 10 of them in his house. When |
| I need service manual or schematics for Phillips Xalio 6100 | most phillips tv service manuals dont help much they r only given to phillips service centers and th |
| digital tunning frozen on a Sony | This is about SONY analogue/digital TVs If at any time a rescan is done and the progress stops Its b |
| service mode lifetec 7055vts | I need service mode tv lifetec 284 lt 7055vts or equivalent chasis.This is
16:9 tv and remote is l |
| Won't Start - 3 clicks and out? | I have a 32" ProScan that started doing the same thing. When I click the ON button it sounds as if |
| SONY Trinitron Problem | Hi, I'm new to this forum.
I have a Sony Trinitron TV (T29SZ8) that shuts down after a couple o |
| thanks! | thanks, walter58 for your advice. sounds like you know your stuff! misfortunately, this is the diagn |
| Philips 27PT6441/37 won't stay on chassis L04.1U AA | Help Please!!
I have only had this tv for about 12 months. And it don't want to stay on.When I go t |
| sony tv kv29st70..picture does'nt show up.. | the picture only shows up after waiting for a period of time even when only changing channels but t |
| Annoying tv | Hello. I live in an aprtment building and they broadcast announcements over the tv on a certain date |
| Samsung LJ44-00068A / PS-423-SD plasma power supply schemati | I am after a schematic diagram of the Samsung LJ44-00068A PS-423-SD Rev3.1 power supply. It appear |
| Beko TVB10080S | Hi all,
I have aproblem with a TV BEKO TVB10080S (shasis ZA1.190-08)
TV start ok and work good for |
|
|
| re; too bright | Hi, try turning the "screen control" counter clockwise a little, I
don`t work on monitors so I`m no |
| Old TV's have often bad solder joints.
Try to gently tap on some components (special the flyback |
| [quote:47f8d28098="Anonymous"]Although this is a simple repair and requires replacing the two conver |
| Board Replacement for TV | I have 29 inch color TV where EHT is continuously arcing. The main board is BEKO and the picture tub |
| Polaroid 1913-tdxb service manual request-Please Help | I am looking for the service manual of Polaroid 1913-tdxb LCD/DVD combo.
My tv does not power on. |
| If HV stays on check CRT for weak emision. This will cause sony TV's to blank out the video. |
| First, what is a LOPT? ” Totally dead with just the high pitched noise.” Horizontal out put transist |
| samsung 19" goes black | Hi my samsung 19" tv (probly 5 years old) has recently been going to all black except a narrow strip |
| Thanks for your replies.
I know zero about tvs - how do i locate the trimmer (to take it out) - a |
| Screeching TV noise | Hi I wonder if anyone can help me. I bought a combination 14" TV/DVD last week and when I turned it |
| plese the chassis.
I have this
BEKO.bin = TV 14" BEKO BEKOTEKNIK
PROCESSOR SDA20581-A504
|
| Have you tried adjusting the picture from your pc's display card driver settings?
I think you can |
| vertical IC in your television | The vertical IC is never mounted on the crt board.
In modern TV's, it could be a TO220 device (TDA9 |