| Subject | Text |
| 50MP1 | Andy, I used to work for NEC and was the European Technical Specialist for Plasma displays. If your |
| Picture squeezes horizontally | Make and model of set would normally be required for more detailed diagnosis.
With the set unplugge |
|
|
| Mag 810FD too bright | A hand-me-down from a friend. The monitor is too bright and adjusting brightness and contrast can't |
| Re: 50MP1 | I have acquired 4 NEC 50 MP1 for free. They all pretty much have the same problem. They will displ |
| hola yo tengo el manual de aiwa wx 220 si alguno lo necesita lo puedo escanear en su idioma scxslot@ |
| PX-50XM1 (50MP1) | All,
Just so you all know, below are the pcb labels from the scan board of the 2 capacitors which |
| the set has dry joints, try resoldering the line output and drive areas of the tv, also on those set |
| Toshiba FC22 Copier Problem | We have a problem on our hands and I need some help.
First of all, let me say, I'm not a copier r |
| Can you get to the B.I.O.S. screen and does it stay on?
Try booting into safemode, press the F8 ke |
| 4 flashes is no vertical sync, check ic501 and related parts, it may also be worth resoldering the r |
| Repair to a 11ak19P4 chassis, goodmans widescreen | I have 2 wide screen Goodmans Tv set that have the same fault.
The TV powers up and comes on when |
| [quote:6a60d01696="Anonymous"]It's most definitely a connection problem in the filament circuit for |
| It's probably faulty capacitors in the vertical scan. First overview would be to visually locate an |
| Sony KV-35v65 hv short | Many people distribute a parts kit for this model of television. It
includes a dual power supply t |
| PX-42VM3 | Hello Pinkwell,
What country are you based in ?? It would really depend on the answer i can give |
| Plasma colours odd until it warms up | I have had what sounds like the same issue. I haven't had an LCD I couldn't repair yet, however I'm |
| Sony | You can go to www.samswebsite and download it for $20. It is to cumbersome to try to scan it and se |
|
|
| PX-50XM1 | Hi Stiff,
Can you email me a close up of the board in picture (Cap0002.BMP) this PCB is the one c |
| URGENT: Sony SLV-E80 Service & Mechanical Manuals needed | Hello,
I desperately need the Sony SLV-E80 Service manual & mechanical manual.
I will acce |
| ak19 | [b:d7090ddf95][i:d7090ddf95] :D firstl check the 2,2 ohms fusible for oc,(ew circuit),check c630 for |
| [quote:c48df66f50="concord"]have (2) service manuals for this oscilloscope, I can scan and email to |
| Phillips matchline IDTV Fault | Hi There Folks
I have a Phillips matchline IDTV 100 Hz Digital scan set.
The symtoms are : Turn po |
| vertical scan failure results in a thin horizontal line ACROSS the screen ie left to right,you can p |
| NEC PlasmaSync 50MP1 | Hi every one,
i have a NEC PlasmaSync 50MP1 Television , scan driver bord is damaged ,i am looking |
| the scan coils are the big lump round the neck of the crt. usually though if there is a fault there |
| service manual/schematic for philips cd104 needed | if anyone has a scan or .pdf I would most appreciate it. I will be getting a comprehensive repair do |
| I can't access a service manual but it looks like a bad hyper board/scan converter. |
| Zenith PVY4665RK | :( I have a Zenith projection tv(PVY4665RK) with 3 vertical lines in top
4 or 5 inches of screen, |
| PX42VM3G | Hello Pinkwell,
I had a great christmas thank you, hope you did also.
The NEC part number you |
| 50MP1 Flashing LED | deejayess:-
1) Power off the unit (using power switch on underside of product)
2) Press & ho |