Subject | Text |
| With record decks, you have to connect a separate chassis ground wire between the record deck and th |
| Just to make sure we're understanding each other...
Set had convergence symptoms (but was working); |
|
| Or the lamp(s), or the bulb connectors, or ...
[url]http://elektrotanya.com/lg_37lf65-zc_chassis_ |
| U r welcomed! 8)
I'll still give your original controller a 2nd go. Most problems for controlle |
| Is now OK. Found that I had left one of the trillions of connectors unplugged under the CD changer u |
| Try soldering up the connectors on the bottom of the board. |
sell Flyback transformer | DEAR SIR
I AM JIESSIE COMING FROM EKEA ELECTRONIC CO.,LTD WHICH IS THE BIGGEST FTY WHICH PRODUCES |
Re: Notebooks. How to replace part. Teardown guides with pic | [quote:892730c2f4="Anonymous"][quote:892730c2f4="Anonymous"]hi sir before i want say sorry to you, |
| Without detailed service info. or familiarity with the specific set, just about all you can do is to |
| [color=red:3be3187b45]Special offer:[/color:3be3187b45]
This DVI to HDMI cable is designed to insur |
Viewsonic N2750w wiring to psu info request | Hi.
If anyone has a Viewsonic N2750w VS10576-1M open at the back,
I could really use a list of h |
| Hi there. Well, ok. I have B&K model 445, and a model 467. There is an adapter that i would need |
| Usually those connectors 'come loose' from too much force being brought to bear.
Is there a lead re |
Bush ws6671sil - 11AK19Pro chassis - Help needed! | Hello!
First off, this site is probably the most useful electronic repair site I have come across. |
| I have an n3250w with a blown chip on my Darfon 4h.B0280.001/CS2. I accidentally bought FSP228-3F01, |
| Thanks 'Guest'
Always suspected d/j's but your suggestion confirmed it.
I have now re-soldered m |
Re: Panasonic 27 inch TV CT-27G5CB | [quote:ab90ebd64e="michaelmcm"]If anyone could please shed some light on my problem with
a panasoni |
|
| First of all... Hello to all the Googlers who have been searching for a solution to the same problem |
acer AL2416W monitor mostly dead | I wonder if anyone may have encountered this...Press power button (with or w/o signal cable attached |
| Ok, here is an update
Spoke to Tiny £1 per min told me to do a factory reset on the plasma,
|
[b]Need Help to fixup LCD cable of Acer Travelmate 290E[/b] | Hi, I have Acer travel mate 290E series. I my Lcd screen was not working I have opned it and complet |
| If memory serves, max. voltage for most three-terminal regulators is 35 volts (7805 min. voltage = 7 |
Hitachi LCD TX38D95VC1CAM | Hello,
I just got this old Laptop from my boss who was gonna toss it out cause the thing stopped |
| You gave three options.
I agreed that it could be any of the three.
Personally, I'd start with |
| Hi,
when I disconnect the two power connectors which goes to the PDP, it's still doing the same t |
| OK, so I've got the LSP ( Large Signal Panel I presume ? ) out & I can't find a V50 connector an |
part numbers.... | Hi Minnie,
I didn't know about "partstore". Their prices are good. If they are listing |
| Check the flyback capacitor(s), those are usually 5-10 nF polypropylene capacitors connected from th |
Philips 28CL6770 28" TV-Intermittent shutdown | I have a problem with a Philips 28CL6670/25Z 28" 4:3 TV.
The right hand side of the picture |
Oscilloscope service man. HP 54615 B and simillar. | Does anybody know anything about HP Oscilloscopes disassembling?
In our lab we have HP 54615 B (5 |