| Subject | Text |
| There will be a loose/bad connector somewhere or far more likely a dry joint (bad solder joint, grai |
| Open it up and check to make sure all the connectors are still in tight, more than likely the board |
|
|
| updates... | Ok, I've since disassembled the set and found another label at the top of the CD transport:
"TCM1 |
| Work on them all the time...
Either you have somehow messed up the ribbon connectors( easily get |
| I think I'm almost there... | Thanks again for your response.
For the heck of it I reconnected the two boards that share the bl |
| There must a cabel connector that fit.
Ask where you bought mp3 player. |
| Insignia IS-DVD1001 DVD/VCR RECORDER SMPS power problem | I have the subject unit which has a bad controller IC in the primary side of the SMPS PCB. I have t |
| Look at the panel, it gives you the voltages and on the sustain boards the connectors tell you the v |
| VHS/DVD audio problems | Ever since I bought my first VHS/DVD player I've had trouble with the DVD sound not being loud enoug |
| BNC cabling | Basically, is it possible to display (patch in) component video from a dvd player to a 21" computer |
| Denon DN-2600F Cable Pinout | I need to make a replacement interconnect cable that goes between the two units. Could you pleas oh |
| How is your DVD player connected to your TV??
1. Via composite video (usually yellow for Video, |
| Fujitsu-Siemens Lifebook E6570 | Hi,everybody!
I`m looking for a service manual or specific pinout of a HDD-Bay connector,used in |
| JVC AV32S575 32" NO POWER DEAD! | Hello,
I have a JVC AV32S575 32" (fairly new 1-2 years old) that is dead no power at all no s |
| Faulty Black Diamond Tv | Not sure but it may be AK19PRO chassis. I copied and pasted fault info on AK19 series below to see i |
| 1) Get a replacement 'black belt' with connectors on BOTH ends;
or
2) Get a replacement connector |
| If it's a very simple supply with the three voltages you mention and ONLY has a power supply turn-on |
|
|
| if it may help all the sony surround sounds i have looked at were Whenever I turn it on, it immediat |
| Please help me with Remote!! | Hello. I have just got my son an Admiral TV and I need to get the remote so I can get into the menu |
| SONY KDL-46S4100 LCD TV - Tried Everything! | Me and my uncle have been trying to fix a Sony KDL-46S4100, and have had no luck. The problem was t |
| I have been waiting for the professionals to post a reply. But until then, perhaps you can benefit f |
| Pinout for battery laptop | Hi, i'm looking for laptop battery oinout connectors for Gateway, Acer, Thinkpad, Hp, Asus, Dell, To |
| Why would you want to do this ?
In what country do you live in ? The electrical power connectors |
| NEC PlasmaSync 4210W | I guess this is your lucky day, or maybe not. The reason your plasma unit keeps going into protectio |
| N2751W and FSP212-3F01 or FSP212-3F02 | Hello,
Thanks to this forum, I repaired my N2751W. It broke down due to a PSU (FSP212-3F01) failu |
| [color=red:ae444898fb]Special offer:[/color:ae444898fb]
This DVI to HDMI cable is designed to insur |
| the only advice i can give is to check that all the connectors are firmly pushed in check the fuses |
| If anyone has issues with the flex connectors adhering to the edges of the LCD screen itself, there |
| Test mode | [quote:60ff895aaa="playedataritoday"]I was just given an Viewsonic N3252W to try and repair.
It w |
| Thanks for the advice Mike!
After fixing this bugger of a tv set I feel like i'm getting a hang of |