| Subject | Text |
| I think the most likely problem is the backup battery on the CPU board, it may leak and cause corros |
| The NJU73xx series analog CMOS switch IC is a rather common failure on many brands that use it .
|
|
|
| Disconnect the speakers and try to power up your set.
If set works ok, the speakers or its connec |
| You may need a different powerswitch, or an ATX case, as the AT switches the mains on and off. Repla |
| Big thanks to those who have replied...
I'm sure that the TV has not been dropped - it had not be |
| Protect LED | My Hitachi 50FX30B had been dead for quite a while, but this weekend I took some time to go over it |
| Ford Orion Stereo wiring | Hi, I trying to install a GOODMANS stereo into my 1988 Ford Orion, but the connectors dont match, an |
| I was just given an Viewsonic N3252W to try and repair.
It was working for a while on tuner mode |
| I don't think IC's involved. You say your picture is now OK. I presume you installed the correct IC' |
| KEF PSW 2500 relay buzz and audio outout buzz | Have just repaired a similar problem with a KEF 2500 - relay was chattering at 50 Hz rate, buzz in s |
| Help Needed PDP TV plasma tv. PDP-4201? Wont turn on | I bought this from a friend recently as a project to fix and possibly sell on, the tv can be seen he |
| sorry the neck board is located on the back of the picture tube.one of the connectors will supply 20 |
| Re: The problem root cause. | [quote:d7257a27c8="Raligh"]Replace 2 capacitors on the board right in the middle of the back of the |
| Resource database for technicians... | Some useful functions of pinout.net
1.Info for various types of connectors and cables – web searc |
| ford focus | hi i have just changed my ford focus factory stereo 5000 rds eon for a ministry of sound head unit b |
| Re: oscilloscope | Thanks!
I've already found it, but thanks anyway.
For the future searches(for archive):
That bl |
| The "snap" connectors that you have to pull "up" between boards. Inspect them. W |
|
|
| some one please help to trouble shoot of my Kadok CX5300 Cam | Dear,
I accidently drop my kadok camara.
I open the case and found no visualy damaged to PCB, Len, |