| Subject | Text |
| check | if you have a multimeter ...check the output voltage ot the adaptor... be shure for right connection |
| Thanks for that, is it safe to test the 12v and 35v circuits with a multimeter? Im not going to get |
|
|
| The Vcc is +/- 36V DC which gives me a reading of 72V on the multimeter. Am I correct or not? :D |
| that fault is a classic painter ic problem, i would not even hesitate blaming it for that combinatio |
| Hyundai HPT-4240 - Dodgy looking caps a cause for concern? | Hi everyone,
I think I know the answer to this, and it’s an easy one, so here goes.
I acquired |
| a most siple ... | a most simple temperature interface is germanium transistor B,K, to multimeter.... but is better to |
| DVD Player: "No disc" message when disc is on tray | Hi, I hope someone can help me with this.
I got a Coby DVD-223 some days ago, which wouldn't read D |
| Canon IXUS700 repair,where are the fuses? help, heres pics. | Hi there.
I have a 7mp Canon IXUS 700, it was dropped by my brother. So cant be fixed under warra |
| classic example of a low crt on a sony, especialy if the background is not black and has a slight co |
| GOS-955 oscilloscope manual wanted | Can anyone please help me with a scan of the GW (Good Will) GOS-955 oscilloscope manual.
I am re |
| Hi!
First what comes to mind is that power supply had gone bad. And so it
can be 2 cases:
1)The |
| pnp npn transistor | excuse me for my bad english..
For test npn you have to use a multimeter and put positive lead to b |
| hi,
many thanks for replying.
is there a way to test the fbt.
the horizontal transistor see |
| SPAMMER FROM VIETNAM MANPOWER | Dear Sir/ Madam,
[color=red:cbb88ffe79][b:cbb88ffe79][size=24:cbb88ffe79]WE ARE CLASSIC SPAMMERS[ |
| Replace DP53 and CP51 with NEW components. They will check ok on your multimeter but will be probabl |
| Grundig ST-70 574 SAT--CUC 5820 | I make a post a week ago about a thermic problem, problem who now it is turn out to be a total failu |
| Acer hates AC power! Is ok only with battery | Proud owner of an Acer Aspire 1510 series that I am :D , I keep resoldering the power jack back into |
|
|
| Decode for a Becker | Hello,
Please could you help me to decode an old Becker Classic BE 2010
No S1132546?
Thanks fo |
| You need to check the output transistors for shorts. Test the forward junction voltage drop with a m |
| Sony KV-X2982U | Similar problems to another post on this site.
When switched on, standby light comes on and stays |
| Mitsubishi 29" TV set - frame collapse fault... | Hi all.
:)
I have here, a Mitsubishi CT29AM2 TV set with horizontal frame collapse.
Sound is |
| Aiwa Tv, Model No TV-C201KER is not turning on, Help Plz. | Hi, I have Aiwa Tv of Model No TV-C201KER, but now it is not working, I have checked the power cord, |
| data sheet | I was delighted to locate a data sheet for my MASTECH M-830b multimeter.
I have blown R5 and R18 an |
| power problems | Check the High Voltage Transistor and the Voltage IC it is most likely one of those. The Transistor |
| Hello eli2
the almost thing with Rainbow Effect at the classic Sony Black-Matrix Tube is, that so |
| In general, your listed symptoms are usually caused by DC voltage induced in the signal path. Classi |
| Sharp 51DT25H stuck in standby | Hi everyone. I'm not a TV repair engineer by trade, but have been landed with a Sharp 51DT25H to rep |
| if you have a multimeter i would suggest you check any other transistors around the one you replaced |
| BAD NEWS, THAT IS A CLASSIC EXAMPLE OF SCREEN FAILURE, ONLY RECOURSE IS REPLACEMENT |
| How do you store all your product manuals? | Until now, I've been using a classic 3-ring binder to store all the user manuals of my electronic pr |