| Subject | Text |
| Hi Mark,
That’s a very logical approach. Yes! I can move each color line and save it too. Horizon |
| If you have no experience in tv-repair, YES you should be very carefull when soldering on the inside |
|
|
| I'll always dip new tips in a bit of solder. So the tip gets a protective coating.
Also, when cle |
| Re: Sony TA515 (audio) | [quote:1e8108f9a4="Darko"]Hello to all
Need sch. for Sony TA515 tuner+amplifier.
Thanks and regard |
| INNO-HIT MODEL,IH19916T17B LED SLIM | Secteur de la panne: Programming / Software
Schéma disponible: Non
Description de la pa |
| Hi, sorry it's difficult to explain. Imagine an IEC extension lead - the female end contains the pin |
| Indeed sounds like a bad memory or microprocessor.
But it could also be a bad connection between |
| Hi,
Just a few questions,
1) Start by checking which cicruit is failing.
E.g. Do you have pow |
| [quote:312c9ca9d2="Al_Dodge_Bundy"]Is the main fuse blown?
If yes, there's a problem in the prima |
| samsung crt tv cx-528z | Hi,
I'm looking for Sch. diagram of this model to repair a small problem on the control board. |
| Re: Thanks... | [quote:0bd43a221f="newcoppiceman"]...for fixing the links! First time I'd tried including photos (n |
| Code Philips | Bonsoir est il possible d’avoir le code
Merci
i43.servimg.com/u/f43/12/46/46/61/fa210a10.jpg
|
| If you've already replaced the capacitors (better spelling as "capacitators" :D ) and the power sup |
| There probably is a bad connection between the LCD and driverboard.
Open the clock en gentley pus |
| Hello Shai,
It seems like, during transport, a dry solder joint or bad connection has been create |
| salut c'est hamid | [b:5997ac4602]Aidez moi faire du bien je veux un schéma de LG21FD1RG pour créer une maquet |
| picture | <a href="http://s481.photobucket.com/albums/rr175/minnie-me_02/?action=view¤t=DCP_ |
|
|
| Code Philips Renault 25 | Bonjour.
Je recherche le code de la chaîne hi-fi Renault 25
i43.servimg.com/u/f43/12/46/ |
| on the way to getting fixed | Hi Mark / Larry --
I haven't got it fixed just yet (as of 2/17). Probably within a week -- wait |
| Is the main fuse blown?
If yes, there's a problem in the primairy side of the power supply.
If |
| Maybe the vibrations of the subwoofer created a dry solder joint, or bad connector-connection!
Tr |
| Samsung CS-29M20SPQ raster are shifted to right-upper corner | In my Samsung CS-29M20SPQ S61B chassis raster are shifted to right-upper corner so the left and bot |
| Code Philips Renault | Bonjour
Est il possible d’avoir le code Philips
Merci
i43.servimg.com/u/f43/12/46/46/61/ea7f |
| Thanks for the warning mark.
I did put a load on each of the pins to make sure that it resonates |
| Can you post a photo of the spring and vcr-engine?
Mark |
| Sny 61" TV | Thanks Mark. I'll do that.
sorry for late reply.
Sean |
| Shèma et implantation de composants sur une platine | Bonjour, s'il vous plait je cherche le schéma et la photo de la platine ..Alimentation ...Phil |
| Hi minnie
I have stripped the TV down and think I have located one of the caps you refer |
| Hi Jim,
I'm looking for the JVC MX-D401T service manual.
If you have it, and could share or |
| There probably are some dry solder joints or bad cable connections in this amplifier.
Just switch |