| Subject | Text |
| Sony CCD-TR6 service manual anyone ? | I need to make tracking adjustment on this camcoder. Sony ESI does not have the manual/schematics. |
| Toshiba 21F8XEU TV service menu | Hi I need the procedure to enter the service menu for Toshiba 21F8XEU TV (made by toshiba-elaraby eg |
|
|
| Philips 27PT6441/37 Replaced part still NG | Thanks Minnie for the detailed repair procedure because my son asked me to repair the set he owns. |
| yes, I solved the problem. it is necessary to decode the IDC A09 according the procedure indicated i |
| I had the same problem and I solved in this way (cut & paste from nl.hobby.video newsgroup messa |
| I figured what the heck, it doesn't cost anything to try turning that adjustment the other way, and |
| Re: yamaha RX-V1800 | [quote:e5feb97d31="[email protected]"]I just had my RX-V1800's dsp assembly changed as what the yam |
| Sony camcorder service manual CCD-TR600 | Can someone upload this one or post back where I can get this graits? I need to gt the tracking pro |
| T664 service mode | I have seen this procedure posted in many places but it does just not work!!
Preset a station |
| [quote:7f8e6bc067="tsgunnell"]on the flyback transformer the top control is the focus control adjust |
| Re: Need HP s5500 | Hi All
Need help for HP s5500 mfg AOC cmc:551v chassis .
need to know how to enter to factory mo |
| help hitachi 50gx20b convergence problems | I have done some reading , have a mechanical/ electrical background
( automotive) and was wonderin |
| W322NS Service Mode. | This is thanks to another website.
Goodmans TV Model: W322NS
Procedure to enter sevice mode
Swi |
| it's eeprom needs to be reprogrammed
there is no standard service procedure for this
i can mail y |
| [quote:763fb2fb0a="Bitza"][quote:763fb2fb0a="Anonymous"]I know the reason... In my case it was a bad |
| TV (direct view) color variations | I recently purchased a used 27" Sony KV-27FS120 and most of the time, the picture is great. Som |
| Dell p991 | I need the procedure to open the p991 cabinet, my monitro nurned out and i could only buy a white on |
|
|
| Panasonic Fax KX-F90, ERROR 22=TImer IC Error, Service requi | This fax was dead. I repaired the power supply. Now it's ok, but the display shows code error 22, TI |
| Common problem with those sets, however are you sure?
The part itself retails for about $60~70 & |
| Hello, you must change the chassis assy.
The code number is A7018245B.
After make the adjustment.
|
| 30 screws! Thought you were a tech.
In order to get to the other end of the cable, you would need t |
| NAD 7240 Amplifier Idle current adjustment question/clarific | Hello all,
I'm currently working on the finishing touches to an NAD 7240 PE receiver and during the |
| Help with project | Well, amphy60, the usual procedure is for the inquirer to post a description and details of his proj |
| SABA | I need service mode procedure for the same product T70170RI. If anybody know how plc help.
Thanks |
| After 46 years servicing electronics, there is one thing that never fails to amaze me. A customer w |
| Re: Panasonic 150-fx error e1-33 | E1-33 CCD offset adjustment failure
Fail to adjust the CCD offset. |
| Philips projector - need help | Hi, please can anybody tell me HOW to get into service menu on Philips projectors? I have Philips Ho |
| SOLUTION | OK. Its an adm turion laptop with a sis chipset. There is nothing wrong with the motherboard. The pr |
| IF THE PROCEDURE ON PAGE 5 OF THE MANUAL DOES NOT WORK THE EEPROM WILL HAVE TO BE REPLACED AND ALL T |
| RCA 52" Convergence Issue - Please help. | Hello,
I have a 52" RCA Model p52921, Chassis ptk195mb.
The problem is that the convergence go |