| Subject | Text |
| minnie,
I found another fuse blown. Thought I had check everything. I waited to reply until I got n |
| Re: Sony ccd-trv43 camcorder no record picture | [quote:693d2c1452="wealthwise"]This just started today, I turn on the camcorder to record and and I |
|
|
| Rca Tv Picture dead-makes a shrill high pitched sound | I have an rca tv approx 4 years old and whenever the tv is plugged in ,
it makes a high pitched noi |
| Pioneer sx-434, and Philps 22ah773/05 receivers | I am searching for this schematics, because this my receivers have a problem with radio signals. On |
| Goodmans 11ak37 chassis | it will not come out of standby, power light pulsing.
i've managed to get the set to turn on by dis |
| Bush DVD1005 - resistor burned | I currently have a Bush DVD player, model DVD1005, which does not work. On investigation, a resistor |
| data sheet | I was delighted to locate a data sheet for my MASTECH M-830b multimeter.
I have blown R5 and R18 an |
| Re: Why model or chassis number is required! | [quote:6df2498d7e="jts1957"]c14147 1.5uf@100v[/quote:6df2498d7e]
Ummmmmmm........not sure what t |
| The screens were supposed to be FLAT since the very begginings of the TV (including those B/W ones), |
| Samsung TV (SP42W5HFX/XEU) - Convergence Problem | Anyone with any advice on how to fix convergence problem on a SP42W5HFX/XEU rear projector tv?
C |
| Factory reset default SANYO ce28 wn5 b | Thanks Paul justmanuals. It worked. Is there a factory reset code for this model? Pincusion distorti |
| Thinkpad T23 Power | Yes this would definately be a cap problem. they are faulty not alowing to discharge. Try unplugging |
| service manual | Hello!
i search the service manual - electronic. My Unit is Siemens NCDC 2015. I want to install an |
| Please help, advice needed | Could someone please help me? three days ago my RCA 52' model#p52812bl went out and started making a |
| 83 ramcharger need help trouble shooting | I Just got an 83 ramcharger for free from a friend who moved out of state and the battery blew up on |
| 11AK19PRO Dead - LED is dead and it sounds intermitently | Hi
I need some help with a TV which has a 11AK19PRO Chassis.
First I had problems with Narrow pi |
| Not even a late-comer? Good god this place is a ghost town.
All the capacitors in the area check |
|
|
| [quote:18a63d2739="jts1957"]I put a new diode in D31 and everything connected. [color=red:18a63d2739 |
| Maybe you could sell your daughters and buy a big screen? LOL
Sorry:)
I am not familiar with y |
| Philips 20PT6441/37 Vertical framing out of whack! | I have a philips 20PT6441/37 that has a verticle framing problem. The top 3-4 inches of the screen i |
| Sharp DA-50W chassis, problem with horizontal output stage | Horizontal output transistor Q601, BUH515 was shorted and resistor RA611 showed signs of overheating |
| Before that,
SYMPTOM: Distorted or no picture
SOLUTION: In order to determine whether picture prob |
| Toshiba TV 14R21 (PWB-1386 Board) keeps power on and off | [quote:b8bfe93703="minnie"]Chech r216 10k ohm to see if it's burnt. If so you need to replace the re |
| Bush tv (11ak45b5) Picture collaspe | Hi
I have been given a bush tv to have a look and and see if I can repair it. I am after so help |
| philips 29PT5515/01 SA10 freezes on starting channel | tv freezes on the starting channel, it doesn't respond to remote control (working for sure, tested s |
| Well, sadly the crackling noise is also in the headphones. SO now I need to go further back in the a |
| philips fl 1.17 | Hello my problem is that i have a vertikal white line like noise or something in the right side of |
| Not quite sure of the question, but here's the info;
In general, it is prefered to have an ESR me |
| minolta 1054 | it is verry important to run F8. and to settings C7 on 1, C5 on 2, and in location 4 (meter count-st |
| hope you discharged the smoother cap b4 you started arsing about. take it to a professional as the a |