Subject | Text |
DVD player won't play CD's | Hello, I have a Marantz DV-9500 DVD player and it plays everything fine but CD's. I have changed the |
schematic search | Does anyone have a schematic for a Solar Power Inverter model PI20000X? |
|
| check R704 value can vary depending on model usuall 100 ohm |
Schematic for AC power adaptor AC-L10A | Hello! I needa schematic for this AC power adaptor Model: AC-L10A By SOny. THis adaptor is from a vi |
SONY KV-28WS3E convergence | Hi,
I have a convergence problem with this tv , the chassis is AE-3
A green image (5cm) at the l |
Re: tv 770c schematic diagram | [quote:f53f313f29="darkest"]hello
casio tv 770c backlight problem fluorescent tube no light and n |
Re: Sony TV KV-35V76 ON and OFF picture | [quote="grizzley"]I have a Sony television Model KV35V76 where the picture is on for two seconds and |
Yamaha Keyboard PSR76 Very low and no Head/Aux sound | Hi guys i have here a keyboard Yamaha PSR76 and have sound both speakers but it's very low dispite i |
updates... | Ok, I've since disassembled the set and found another label at the top of the CD transport:
"TCM1 |
led moving sign | hello
i m studying electronic engineering at Turkey.
i want to sell led moving signs. forexample |
sa-940 schematics | Help me! I need a schematic amplifier for model pioneer sa-940. Thank you very much. |
42pd9932 plasma TV Philips | I am looking for the service manual for a Philips plasma tv, model 42PD9932.
Thanks,
JB |
Dead Dell 1025HE | I'm attempting to repair a Dell 1025HE 17" monitor (essentially a Nokia 447S) for a friend.
sympt |
| Could you please email me service manual for a jvc 36" tube model AV-36985.
Thanks
p_dmoore@bbn. |
| You can't really see if it's bad. It's the big thing in the right hand corner with the red wire goin |
| As far as testing caps, there is no reliable way without a tester and it should be pulled from the c |
Re: Kenwood KR-V8090 AV receiver, no sound | Dear friend i already encountered the problem with your kenwood. Vintage ampli is very lovable and a |
|
Help 4 u | This problem is almost always a dirty open contact switch with various positions on the bottem most |
Goldstar Breadmaker | gear assembly underneath the bottom of the baking pan has worn. I will buy a new pan or replace the |
Re; Checking "lenses" | I presume you mean the Laser.
All CD / DVD units have one (sometimes two) laser assembly. Generally |
| I have never seen or heard such upgrade myself before.
If the equipment was originally built in |
Re: Opel radio code | [quote:c01915bcf5="pezii"]Hello.I need the code for SIEMENS VDO CDR 500 (E) 2 F4
N 93171870
GM 050 |
| For one thing, there is no lasers in television sets. You have a cold solder connection for the heat |
| I would suggest that you switch the tv on for 10 seconds, off for 15 minutes repeatedly until the tu |
| I do not agree with Dfarhen, if you do not know what you are doing or do not have a tester for the c |
| May not be a bad idea to change or at least test the electrolytic capacitors(if you have a tester?). |
inverter | bonjour panne d'image , LED bleu au démarrage flash rétroéclairé puis se coupe , |
Sony CDP-cx200 Player keeps skipping. | Hello everyone, I have a CDP-cx200 home audio cd player and the player keeps skipping after a few se |
panasonic SA-VK82d Disc `5` flashing `Change` | [quote:521fc61ed2="jts1957"]Disassemble - Clean and lube MODE switch - Reassemble (Timing mechanisms |
Pioneer SMQ300B | I have a unit in bad shape due to rat infestation.I had to resort to complete dis assembly. Hoping |