| Subject | Text |
| Re: code for alfa 147 GTA | [quote:b4585e9eb9="titounight"]HI
i need code radio car of my alfa 147 GTA model 2004
serail num |
| Panasonic audio board part #. | Got a Panasonic mdl;PV-M2776 w/no sound. Need part number for sound PC board.And any tips you may ha |
|
|
| Wasjust looking over vtech's shoulder andfound a generic schematic to a power supply that should be |
| if main fuse blows,check diode bridge on small board at front where fuse is.otherwise front end powe |
| Possibility:
-Over voltage at C619 caused by:
* C at pin1 and pin2 STR81145A defective.
* STR81 |
| SONY KV-2063R Television | I'm likely not the first to inquire into problems with this particular model of TV.
Here's a brief |
| Marconi TF 2700 | Does anybody have a usermanual for the Marconi R-L-C Bridge
[b:5e0cb55401]TF-2700[/b:5e0cb55401]. O |
| since you have a VOM/tester, set it to X1, be sure to discharge the largest capacitor u can find in |
| Just because a transformer has a mess of pins, does not mean it has to use all of them. :wink:
AC |
| Re: Display | "7) I then soldered back those 2 resistors and bridge wire."
Sounds like you're on the |
| Radio code | Hello , I need my radio code in my car please help me. Thanks
renault model NO:22DC229/62P PROD |
| TV/DVD combo TOSHIBA | This unit was working fine 2weeks ago and now it will generate sound but no picture the dvd player o |
| Sony TV losing color | Can someone tell me why would a sony tv (i do not know model) lose color occasionally, and then rest |
| Hi Raj,
Thanks for your reply. I powered up the amp and checked the voltage across the relay and |
| It's not a ctc chassis. The set was sold "as is " for junk by Wal-mart. It's less than a y |
| hi, i have spent some more time on this and have found that i dont have 240v a.c on the bridge recti |
| It depends if you want to learn for fun or profit.
I wouldn't recommend television servicing as a c |
|
|
| Re: Volvo V40 | [quote:11f5865008="forumowisko"][quote:11f5865008="Markos_Muti"]Hello. I change my car battery.
An |
| If you need current feedback to get a correct waveform through an inductive load, please take a look |
| Check for power supply | yes! replace all the bad components but first isolate the problem before you power on. Also check yo |
| Follow up: I did manage to track down the fault after replacing the cascade and HV transformer at gr |
| I have hundreds of old books with tons of dandy information. I'd be happy to part with most of them |
| Re: Blown Fuse - Troubleshoot Why | [quote:5c2ee5ef36="huntro1"]Hi Vtech,
Thanks for your reply. I will get the amp measurement this w |
| Magnavox TV Problem | My Magnavox model # 25E501 appears to have defaulted to a factory setting that keeps going through a |
| service manual bpl sanyo TV NQR53QD2 | Since the picture is coming dark,no Y-Singal,If possible pls send me the detal of BPLSANYO TV Model |
| RC950 | I need service mannual fot Aspire RC 950, help me enyone, please. THX. |
| Have you checked the bridge rectifier? |
| Okay, in case of 240 Vac supply, you should have at least 300 Vdc after the bridge rectifier. I thin |
| onida 21" tv circuit diagram | sir i want onida tv 21 ky2 model. problem is sound ok,no video,white raster apper with programme sou |
| Re: sa-940 schematics O IDEE MAI BUNA | [quote:0e4d27a35c="dragos"]Help me! I need a schematic amplifier for model pioneer sa-940. :idea: |