| Subject | Text |
| Indeed sounds like a bad memory or microprocessor.
But it could also be a bad connection between |
| Technics SA-DX 930 problem. | Hello to everyone... I'm new here :))
I have w problem with my technics amplituner. Suddenlly it |
|
|
| code for radio | Hi everyone!
I have problem with my radio in opel corsa c 2004.
it always says "SAFE" wh |
| Ok
So the resistance of the U31 Vin and Vout with everything connected I get 0hms.
With the A |
| I have an other problem | Hi, I'm a tech from Mexico, and I have the same carver HR895 but the secondary power supply is loos |
| Re: Viewsonic N3245W Black Screen - Need some help | Today, I received a replacement inverter PCB that I ordered from ShopJimmy.com. Smooth transaction, |
| I have a 2060u as well, and the info from the original poster helped me figure out how to enter and |
| Hitachi C2x7xTN - E/W problem | I have an intermittant problem on a HITACHI C2576TN. It started with the screen width alternating, o |
| The Painter IC is the cause of your problem....replacement is the only fix.
If you are going to a |
| Panasonic euro-7 without sound | :D I´m new here...and i dont speak english very well...sorry!
I have a panasonic without sou |
| 04/13/2011 10:05 PM 612,477 6507_00b.pdf
04/13/2011 10:05 PM 1,215,173 80A_.pdf |
| I haven't worked on a Proscan before but based on your description, it would be logical that your pr |
| Re: Plasma TV Hantarex PDP42QV | [quote:308952e402="mgmelettronica"]We need schematic of power pcb.Thanks![/quote:308952e402] |
| Re: Looking for Samsung SV-5000W video head | [quote:27c9999426="vtech"]
WAIT...may not be the video head as it was a common problem with a lot o |
| Re: I need help with a code. | [quote="sleepy003"]I bought a car but there no radio code written anywhere. Can someone he |
| Vtech,
I really appreciate your input, thanks so much.
No there is no bottom access panel on this |
| Hmmm. This could be a pain in the arse, but maybe not. It is possible that there is a missing low vo |
|
|
| Vauxhall Vectra 03 Radio Code | I have taken headunit out, here is all the info from label
SIEMENS VDO
330886636
No::13 |
| Philips Brilliance 181AS LCD TFT monitor with dull display | Hi everyone,
Perhaps someone would be kind enough to offer me some advice... I repair electronic |
| Please check if there is a short in the high voltage circuit on the main pcb.
(probably a shorted h |
| Re: Viewsonic N3245W Black Screen - Need some help | I would like your old inverter board; have one with bad transformer on; can't find supply of board o |
| Corsa radio code | Siemens VDO
13 138 246
CDR2005
UY8
GM020542922497 |
| Grundig RCD 1420 MP3 | I have a Grundig RCD 1420 MP3 portable hifi that keeps blowing the capacitor C926 on the rectifiter |
| replace ct301 on the colour decoder pcb with a 15pf 50v cap, applicable on pal versions of the set n |
| RCA CTC197AH | Hi Guys,.Me again,This set had good pic after i did some convergence adjustements,but now the set ru |
| Re: Curtis Mathis 32" TV runs for 4-5 minutes then powe | your problem can be due to a loose connection on pcb have it checked and servised also can be a prob |
| D28 BY299 | Thank you for everyone's help with this.
I found the problem to be D28 being incorrectly oriented |
| Laptop LCD white! | When I turn on my ASUS L2000 the screen flashes from black to white (when it should display somethin |
| Re: Peugeot radio code | Hello
First of all, sorry for my very bad english.
I have CDR 2005 VDO radio in my Opel Vect |
| forget it, they are board level repair or mech complete.
need to align with sharp service remote af |