Subject | Text |
Faulty Black Diamond Tv | Not sure but it may be AK19PRO chassis. I copied and pasted fault info on AK19 series below to see i |
| [quote:2dbe6cb9be="jts1957"]IF it's even bad at all.
You DID test the original?[/quote:2dbe6cb9be |
|
jvc/tv | I HAD TWO FAULTS LIKE THAT STOP YOU HAVE DRY JOINTS ON
VERTICAL IC STOP GOOD LUCK :lol: |
Intercom buzz | Lots of faults can cause buzz, but no ground or poor or corroded ground connections on shields is a |
Denon volume control problem | Hi there, my first post.
My son has a Denon UDM3 mini system which has two faults. The CD mech is |
| It's unfortunate and expensive that all have blown :(
Which ones have blown? Have a set of the 2S |
| Alright, so I replaced the blown 220uF cap on the Tuner board, as well as 5 others that were bulging |
| Also, check the flyback capacitor(s), and check all circuitry around the horizontal output for bad s |
| Can you get access to the rear of the television to tell us what chassis is in your TV? Usually it' |
STR-DB725QS | Hi Andreas
Have the servicemanual you need.
Check the solderpoints, its one of the most faults f |
No coulor on play with akai VCR vs245s | Hello!
I've fixed my VCR, but the colour works some times or not.
I suscpect a capacitor 4700µF, b |