| Subject | Text |
| Samsung SCC-101AP surveillance camera sony super had REPAIR | Further question: Has Sony Super had sensor system 2 different input voltages, one 5v for the sensor |
| Re: Audio problem with RCA TV | [quote:b1e59e1e9e="tmahdavi"]Hi,
I have a 32" RCA TV which recently started having audio pro |
|
|
| Kustom Amplifier, need help with troubleshooting | Hello,
I´m new to this forum and you could say that im new to electronics as well. So please |
| SLEH790 SLEH770 Compatibility Problem??? | Hi,
I had a Technics 5cd SLEH770 model but my friend damaged the cd changer.i got my hands on a SLE |
| Hi,
The DC offset is a marginal voltage at the ouput of an electronic stage. In theory, there sho |
| 7" TFT monitors, white screen | Now I have to repair a dozen of 7" TFT monitors (like automotive rear seat entertainment or tru |
| No AV input on Panasonic TC-2110 | Hi everyone,
Can anyone help me out on rectifying a video input fault?
It's a Panasonic TC-2110 |
| I/O extenders for 8051-compatible microcontrollers | I am woorking on a project, based on 8051 compatible microcontrollers and i need many input/output b |
| sony kp53s15 | Great OZ,
I need your assistance Sir. I saw your input about a power supply problem on sony kp5 |
| 5V to 3.3V micropower voltage regulator | hello,
For a microcontroller programmer using USB port ineeded to convert 5v to 3.3V,initially one |
| philips t.v. 43pp925 video inputs not working | I have a philips rear projection tv model no. 43pp925. All my video inputs are not working in the ma |
| [quote:0c9202a23f="ronw_57"]Hook up was with composite cables to get high def picture.[/quote:0c9202 |
| RF connector for tuner.
Reattach the original "stub" to the tuner being very careful ab |
| LG RZ-20LA70 LCD TV | A 20" LCD TV recently came into my hands that unfortunatley is just out of warranty. The unit stays |
| iPod Boombox DIY Help- Audio problems | I am just starting to get into audio work, and started by taking apart a standard crummy boombox and |
| philips 29PT5515/01 SA10 freezes on starting channel | tv freezes on the starting channel, it doesn't respond to remote control (working for sure, tested s |
| While it could be an adjustment issue, it may also be a dry capacitor or mpx decoder IC, as that is |
|
|
| I agree with Miguel. if your mixer has PAN controls just turn all of them to the same end so your ch |
| car audio harmony - rover | Does somebody have shematics for (vdo or philips) harmony car audio system in rover, specialy for it |
| 1st item) Because you don't seem to have any high voltage, I'll would start by checking the HOT (lar |
| tv beko | por fabor necesito eprom de este tv beko elektronik modelo nr20242 chasis g80-190-03 micro sda5535a0 |
| New Teac DVD Receiver DR-H358i and Predecessor DR-H300(DAB) | Do you have a Teac DR-H358i or DR-H300 (with or without the -DAB suffix)? Are you thinking of gettin |
| "An old one" as jts1957 said and I'll add do it with rubber gloves!!!!!
You don't say w |
| rca 27 inch tv has scrambled picture | Here's the deal. I received this tv from a friend who said it was less than a year old. He told me |
| Re: 50" zenith tv convergance issue | [quote:5df3b9f13b="riverdale"]I have a 50" zenith television that i just replaced the hv splitter an |
| No sound, only white noise in Philips MD1.1E and MD1.2E | Reason: Defective Nicam L module.
Solution: as module is expensive and sometimes hard to find: modi |
| Thanks for the succinct answer. That is what I had thought in the back of my mind, though now that |
| eprom dump supra stv28p10 | tv name: supra
tv model: ST28p10
Chassis name: 11ak19p5 (printed on right side of board) on back |
| how to connect philips tv to lap top | I hav philips tv 29PT8321 it has component in input, s video input and AV input it does not hav HDMI |
| Check for supply voltages to the Frame IC. If you don't have a schematic, look up the data sheet fo |