| Subject | Text |
| help | hello master...i have problem tv LG 29FS4RL pict wide...i need service mode and refair tips..tank |
| Very Big Help in sharp AR-5316/20 | I need a very big help that how I can enter code ( 81 ) to reset total counter , very big thanks to |
|
|
| sir, i have onida 21 marvel. i forgot my child lock code, is there any master lock code...? |
| green instead of black | try checking video in conn on lcd. it could also be backlight going |
| Hi G Money..
Are you conected to the correct terminal on the P.C.?? (Preferably "Line Out?")..If |
| Radio Code Renault Please Help | Hello
Any body how can help me thit radiocode Renalt Master
On radio stand 281152815RTQ93 269 |
| Goodmans GTV69RF2 eeprom bin | Hello, has anyone got or does anyone know where I can get a master eeprom for a Goodmans GTV69RF2.
|
| VW42L HDTV10A | I have repaired the master and slave inverters. They are used in Vizio, Philips, and Digital Lifesty |
| Trouble shooting systems | [quote:36d03f5807="Anonymous"]After 46 years servicing electronics, there is one thing that never fa |
| Found a service bulletin | SYMPTOM;
The DSP fails to operate properly. Unusual noise is made or no sound is heard.
[i:559c1 |
| Re: code for nav + magnetti marelli alfa romeo | [quote:cc54d1c5c5="mike54"]Hi !
Could you help me having a master code for my gps nav+ magnetti m |
| They were known for having bad conn on Eprom IC which will give the same symptoms OR it can be caus |
| Sony STR-DB795 crackle noise in front L channel | Hi
First at all I have to say that my English is little bit rusty, but hopefully you understand w |
| midas venice 160 | hi guys
i have a midas venice 160 desk ,there main master fader is destorting and there is no ou |
| service Manuals for Electronic organs | Does anybody know of any that can be downloaded? I am looking for a Conn 717 service manual and supp |
| Problems with toshiba laptop hard drive upgrades! | I have 4 toshiba tecras.
8000, 8100, 8200 and a 9100.
All use the same harddrives of which I s |
| help w/rhomson cable converter | can someone please help me to find video in/video out/either +5 or+12 and ground for this box,i tink |
|
|
| rca proj tv | Thanks for the help... I even got to the adjustments, big mistake went too far on one and lost the m |
| EASY ADD YOUR SLAVE HDD | Easy, remove the jumper installed on your Seagate hdd, connect the WD on the extreme connector and t |
| beovision 7 | please help i need the master code for b&o beovision 7 my kid play the remont control thank you |
| More Info | I checked some voltages coming off of the power supply board.
At the fuze I couldn't get a consta |
| Which board? | So I have the correct voltages coming from my power supply board. I have the dark picture that I can |
| code for nav + magnetti marelli alfa romeo | Hi !
Could you help me having a master code for my gps nav+ magnetti marelli for alfa romeo 147/g |
| Fixed GV47L | While watching a good movie - my screen went light blue ( assuming just the backlights were on) with |
| T=conn board does the timing. Get a service manual so you have the part numbers of the boards. |
| Re: LCD inverter | [quote:3a9c2732a9="Dan the TV man"]...If you see a faint picture the inverters are bad.A board can l |
| Fixed my 32av500u | My backlight problem was fixed by replacing the Slave inverter board.
If anyone needs a Master inve |
| Need Data cable diagram | Hi,
Please i need a Data cable diagram for sync master 793
I will be wating.
Here isa my. |
| [size=18:3a143dd913]me too, i really need it too
data sheet, documentation, scheme
all u can ple |
| Aide pour code radio | Bonjour à tous,
Je viens d'acheter une alfa 147 JTD 1.9 avec le nav HS.
Direction la casse, |