| Subject | Text |
| [b]Tv not responding[/b] | i have a 14 year old Mitsibishi rear projrction 50 inch tv.
i changed the bulbs around 3 years ago. |
| Philips Projection TV 43PP8420 settings | Hi,
I have the Philips projection the model 43PP8420, and there was a problem where I got a beep fr |
|
|
| Thanks for the feedback. the chemical fuses that you refer to what do they look like? Resistors with |
| Need the Pixma iP1500 ac adapter circuit diagram | Hi, all!
I need a circuit diagram for ac adapter Canon K30231 (from Canon Pixma 1000/1500 printer |
| [quote:6e7cb89d10="gary"]replace c1260 in psu section, 1000mfd 10v[/quote:6e7cb89d10]
could u be |
| I am having kind of same issue, have same brand/model plasma tv, I noticed in the begining the strip |
| The 'K' as part of the resistor specification represents tolerance. I think from memory it is +-10% |
| WTD: S/Ms Sharp R-9Hxx microwaves | Hi all,
I'm looking for service manuals (or at least their circuit schematics with keypad diagram |
| gigaset 3016 | can anyone advise me where to get a repair manual for a gigaset 30016 series cordless phone. cheers |
| Re: Polishing of Silicon wafers | [quote:c090204838="Saurav"]Hi,
I have come across a technological development where we are a |
| TV BRIGHTNESS PROBLEM | HELLO, Picture brightness problems in projection tv's stem from many areas. If I were in your posit |
| Plasma colours odd until it warms up | I have had what sounds like the same issue. I haven't had an LCD I couldn't repair yet, however I'm |
| The datasheet for your component is here:
http://www.alldatasheet.co.kr/datasheet-pdf/pdf_kor/TOS |
| Re: Surge protector necessary???? | I don't use one. I think it depends on what the other poster mentioned.
If you have an industrial |
| Schematic | I need Schematic HP laserJet 1000 |
| There are many IC like this, made by Philips, which are controlled by a 2-wire I2C bus, i think they |
| Mitsubishi projection TV- picture squeezed | WS-55819 HD 1080 Medallion series |
|
|
| problem with component video | I am getting a red hued screen from the dvd hookup when using the component video. They are Monster |
| [quote:8c0fcdd08e="srestaino"]Top of CD caddy with previous circuit board removed
[URL=http://s1377 |
| Sony GDM500PS - Please HELP: red signal fluctuations | Hello.
This is actually monitor with Sun logo that came with SPARC workstation. Its FCC ID is AK8 |
| Interior telephone failure in 20 year old house | Hi, My phones are dead. There is white noice. I have unplugged all phones at the wall and then plugg |
| acer 19 inch no backlight | acer 19 inch widescreen ... power light comes on no video..... blown caps in inverter circuit... rep |
| there is a 1000 pf 2kv capacitor in the line output stage often breaks down and causes these types o |
| SONY PC<->Display ( EEPROM programming ) interface | Sirs,
If want to access eeprom data contained in the SONY GDM-F series displays you need this. A |
| Hi,
The DC offset is a marginal voltage at the ouput of an electronic stage. In theory, there sho |
| TDA836xx (circa 1994) series TV processors were designed and aimed for analog television---way befor |
| Well, I re-soldered the wires, but I'm guessing it doesn't matter because I popped the speaker, or c |
| TOSHIBA - STUCK IN STANDBY | Hi, I've got two Toshiba RPTV's, 43VJ13P & 42WH18B, both are stuck in standby when switched on, |
| 14PT1532 /94S ctv went off suddenly on service table | this chassis uses
MC44603 AP powersupply
TDA 7056B audio
TDA 8841 S1 signal processor v h |
| OSCILLOSCOPE LG GOLDSTAR OS-9100D | Please help me TO find the service manual or schematicof lg goldstar oscilloscope os-9100d!! |