| Subject | Text |
| Entering LG TV Model:RT-29FA31X Service mode | Hi, can someone advise me the procedure to enter into the svc mode using the remote control. I need |
| Need Service info for Samsung HCP-4752 | Dear Person:...I just finished replaceing 2 bad convergence IC's in a Samsung HCP-4752... On was act |
|
|
| TV-F21TS1U | I'm looking for a free download for Aiwa TV-F21TS1U (BX1 chassis). The download has to be free and |
| Resetting a canon i250 after a "waste tank full error&q | Could anyone tell me if the resetting procedure for a Canon i250 is the same as for i320.
Or if any |
| the option codes set the parameters within the set ie how many scrarts it has, the type of tuner, wh |
| [quote:6e582d2097="gary"]IF THE PROCEDURE ON PAGE 5 OF THE MANUAL DOES NOT WORK THE EEPROM WILL HAVE |
| hi, the samsung sounds like a vga chip fault, most likely a dry joint. i expect it is a bga chip whi |
| Here's how I got Phillips' attention | Hi all,
Sorry to write again, but I've got a very useful update... My 27PT6441/37 had the same p |
| tv lcd drive with Cmosnyc nothing to standby or power? | :shock: how do I do this kind of trouble what is the procedure to replace the Cmos on that lcd tv c |
| codes | Hi .
The following is the service mode entry procedure for your television.
Turn the volume down |
| :) Okay: lots of folks experience these type of problems after a move. and they do just what you did |
| I Have the same problem | Do you fix the problem?. I Have the same situation and I don´t know how to co hange the frecue |
| bla bla | OK. Its an adm turion laptop with a sis chipset. There is nothing wrong with the motherboard. The pr |
| sony kv32xbr96s affraid to get zapped!! | after fixing almost all troubles on my sony with your gratefull help guys
the final step is to adju |
| Hi Jouni that's great. And I've already found the procedure now. It is the same method that you de |
| Copier Agfa X7 | How can i access in service mode at copier Agfa X 7? Procedure is diffrent to Minolta EP 1030! Thess |
| I am sure you would have tried turning the 'intensity' up? If you find the beam wind it back down so |
|
|
| [quote:ad9540614a="Mad Professor"]I have been away from home for a few weeks.
I've been looking |
| zenith z50z83r8 | Am trying to locate as much info about this tv as i can. anybody have the correct procedure for set |
| Service mode | I as well ned the service mode procedure.
Please if someone know that please post it in forrum or s |
| yes, I solved the problem. it is necessary to decode the IDC A09 according the procedure indicated i |
| NORDMENDE IMC72 Prestige | I bought a new remote control for Nordmende IMC72 Prestige. Since it was not an original remote I n |
| Sony camcorder service manual CCD-TR600 | Can someone upload this one or post back where I can get this graits? I need to gt the tracking pro |
| T664 service mode | I have seen this procedure posted in many places but it does just not work!!
Preset a station |
| Plasma colours odd until it warms up | I have had what sounds like the same issue. I haven't had an LCD I couldn't repair yet, however I'm |
| How can I reset Goldstar VCR | Hi,
can you help me ?
I dont know the reset procedure after cleanning head video on my VCR Goldsta |
| it's eeprom needs to be reprogrammed
there is no standard service procedure for this
i can mail y |
| [quote:763fb2fb0a="Bitza"][quote:763fb2fb0a="Anonymous"]I know the reason... In my case it was a bad |
| Polishing of Silicon wafers | Hi,
I have come across a technological development where we are able to develop nanosilicate |
| "Distorted" is too generic to understand what your problem is. If the customer convergence procedur |