| Subject | Text |
| This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after pay |
| Your problem is still related to the backlight section. Start by checking the power supply to the I |
|
|
| phillips | if thier is no sound eithier your problem lies at the tuner section if there sound try to replace th |
| By the way, anyone else got other suggestions or experience with this set?
Besides suspecting ver |
| service manual/schematic for philips cd104 needed | if anyone has a scan or .pdf I would most appreciate it. I will be getting a comprehensive repair do |
| 50MP1 | Andy, I used to work for NEC and was the European Technical Specialist for Plasma displays. If your |
| Picture squeezes horizontally | Make and model of set would normally be required for more detailed diagnosis.
With the set unplugge |
| Spindle Motor | Hi VTech... Thanks 1st for replying.
OK... Will solder Q1116 back into the board! :-) Thanks for |
| Service mode:
With TV ON Press simultaneously OSD button on TV panel and
Standby button On remot |
| No sound from Denon AVR-900 receiver? | The receiver powers up, displays correctly and shifts display to all functions. However, it produces |
| Re: Yamaha RX-V750 | Hey there will try to help, The second click usually states that the post (Power on self test) has p |
| Mag 810FD too bright | A hand-me-down from a friend. The monitor is too bright and adjusting brightness and contrast can't |
| Re: 50MP1 | I have acquired 4 NEC 50 MP1 for free. They all pretty much have the same problem. They will displ |
| Re: peugeot radio code | [quote:da7380a6aa="masterskay62"][quote:da7380a6aa="vunjko"]peugeot 206 serial CL0410Z0151554. MOD |
| Interior telephone failure in 20 year old house | Hi, My phones are dead. There is white noice. I have unplugged all phones at the wall and then plugg |
| yes, I have had many of the ceramic caps in the hv section cause a problem.
if you heard a snap, lo |
| Conrac 4142 x-sight plamsa (fujitzu) resistor values needed | I am having trouble finding a schematic diagram for this unit.
These resistors were burnt beyond |
|
|
| I have one of these, and it is broken! | I just acquired one a Hitachi model 50ux58b from a friend that was going to put it out for trash pic |
| hola yo tengo el manual de aiwa wx 220 si alguno lo necesita lo puedo escanear en su idioma scxslot@ |
| PX-50XM1 (50MP1) | All,
Just so you all know, below are the pcb labels from the scan board of the 2 capacitors which |
| the set has dry joints, try resoldering the line output and drive areas of the tv, also on those set |
| You can get the Pioneer DC-Z73 service manual at www.schematics.me
http://www.schematics.me/purch |
| No Power in - CTX PR705F 17" Monitor | It was No power - FS10SM was replaced with IRFP450 (approx. same ratings) and then there is no power |
| Philips 28PW6816/05 | YES IT IS CHASSIE A10E AA TV+DVD BUT THE BIT I REQUIRE IS THE DVD SECTION WHICH IS NOT LISTED ON THI |
| NO TURN ON | YOUR HORAZONTAL TRANSISTOR OR(HOT) MAY BE BAD BUT IT SOUNDS LIKE A COLD SOLDER JOINT IN THE POWER SU |
| Re: sa-940 schematics O IDEE MAI BUNA | [quote:0e4d27a35c="dragos"]Help me! I need a schematic amplifier for model pioneer sa-940. :idea: |
| Toshiba FC22 Copier Problem | We have a problem on our hands and I need some help.
First of all, let me say, I'm not a copier r |
| Can you get to the B.I.O.S. screen and does it stay on?
Try booting into safemode, press the F8 ke |
| 4 flashes is no vertical sync, check ic501 and related parts, it may also be worth resoldering the r |
| The datasheet for your component is here:
http://www.alldatasheet.co.kr/datasheet-pdf/pdf_kor/TOS |