| Subject | Text |
| SOLUTION | OK. Its an amd turion laptop with a sis chipset. There is nothing wrong with the motherboard. The pr |
| I have a kef 2000 sub, all op transistors went short along with the -15 regulator.
The relay had go |
|
|
| Philips model# 50P8341 no sound | I have a 50" Philips 50P8341 tv that has been giving me lots of trouble over the past few months. T |
| when you say its cutting out, do you mean it only heats for 3 seconds, or it isn't heating at all? T |
| It depends if you want to learn for fun or profit.
I wouldn't recommend television servicing as a c |
| Here is the problem | All functions are working but it doesn't dial the numbers. There isn't handset, keypad is working, r |
| [quote:251b4c8c34="maverick"]I have another GE TV here model 25GT516TX1. I've attempted repairing th |
| Fixed my 32av500u | My backlight problem was fixed by replacing the Slave inverter board.
If anyone needs a Master inve |
| Have you tried adjusting the picture from your pc's display card driver settings?
I think you can |
| Philips 28 PW6515 | Require set up procedure to alter EW
[email protected] |
| denon ud m3 cd problem | on the denon ud m3 cd repair,excellent job finding the fault and posting repair procedure, i went a |
| Varying degrees of electronic knowledge | I've Noticed That Users of the site have varying degrees of electronic knowledge it would be helpful |
| 11AK19 PRO | Hi
I have a Black Diamond BD2851s (Vestel 11AK19 Pro I think) 4:3 28" Tube
The original fault |
| Re: 11AK19 PRO | [quote:cd97d4b1f9="fistral"]Hi
I have a Black Diamond BD2851s (Vestel 11AK19 Pro I think) 4:3 28&qu |
| Unless relay contacts are 'welded' together or relay energizes just for an instant - 'was last ON' m |
| Hi again,
By bypassing the main speaker relay everything works great. Does anyone know if this mi |
| So the amp was pulled and the buzz is variable with the "bending" of the circuit board. M |
|
|
| Toshiba 21F8XEU TV service menu | Hi I need the procedure to enter the service menu for Toshiba 21F8XEU TV (made by toshiba-elaraby eg |
| SUBJECT: DIGITAL CONVERGENCE ADJUSTMENT MODE ACCESS
Details:
In the past, when the technician need |
| [quote:627ac39644="FalconFour"]Thanks!! :D
I already replaced the two resistors RP30 & RP31; |
| Sony KV27s46 not power on | I have Sony 27S46.
When power on, i heard relay is on, and see the LED standby flashing and heardre |
| I've got the SAME model and same problem as you guys. Been looking online for several days with no s |
| magnovox 55p8288 | I have a 55" magnovox projection tv with initially was some color shadows to one side. All col |
| This fault is normally due to the painter IC on the SSB panel which can give you some very strange f |
| Re: yamaha RX-V1800 | [quote:e5feb97d31="[email protected]"]I just had my RX-V1800's dsp assembly changed as what the yam |
| I need a service manual for a Toshiba 61HX70 Projection TV | I have a misaligned red crt and was wanting to see what the adjustment procedure is |
| How wide are the lines/bars? If they are retrace lines you will need to set the screen/colour contr |
| The datasheet for your component is here:
http://www.alldatasheet.co.kr/datasheet-pdf/pdf_kor/TOS |
| Hi
I need the V5 sus board kit, does anyone have any contact details for CHS? As £50 sounds b |
| Playback is dark | I recently purchased a SONY DVD Recorder & Hard Disk Drive (HDD) Combo (RDR-HX715/KIT). When I |